ASSEMBLY INSTRUCTIONS 2PCS A Right Armrest D E 2PCS 24PCS Bolt (M6*55mm) Hex Key 8PCS K 8PCS L O 8PCS Bolt Nut Cap (M6*35mm) 1PC Wrench 24PCS Nut 8PCS V 72PCS I Washer 16PCS N 2PCS Low Leg Bolt (M6*30mm) 1PC U F Bolt (M6*25mm) Bolt Cap M 2PCS H Chair Fixed Frame J Seat Up Leg Back 2PCS C Left Armrest 2PCS G 2PCS B W 2PCS Swivel Base ASSEMBLY TIPS: Please use the hardware and accessories included in the set. DO NOT use other electrical or manual tools.
ASSEMBLY INSTRUCTIONS Figure 1 STEP 1 : First connect chair seat (C ), armrests (A & B) and chair back (D) with washers (I), bolts (K) and bolt caps (J) as shown in Figure 1. Then connect swivel base (W) and chair seat (C) with bolts (H), washers (I), nuts (L) and nut caps (J).
L E I F G M J Figure 2 STEP 2 : Connect chair legs (E & F) and chair fixed frame (G) with washers (I), bolts (M), nut (L), bolt caps (J ) and nut cap (N) as shown in Figure 2. O I L Figure 3 STEP 3 : Connect chair seat (C) and chair legs (E& F) with washers (I), bolts (O) and nuts (L) as shown in Figure 3.