Model MC1227 Handheld Steam Cleaner by Top Innovations, Inc. Please read instructions before use. Mail in your warranty registration card.
LETTER FROM THE CEO Dear Valued Customer, Thank you for purchasing the Handheld Steam Cleaner. This versatile and convenient new product places the cleaning power of steam in a compact and lightweight appliance that is easy to take anywhere you need to clean. Plug your Handheld Steam Cleaner in, and in minutes, you are ready to clean automobiles, motorcycles, boats, ATVs, grills, and much more.
CUSTOMER SUPPORT CUSTOMER SUPPORT For problems with your steam cleaner, refer to the Troubleshooting Guide Located on page 14 of this manual. Additional inquiries should be directed to our Customer Support services at 1-800-711-6617 ext. 102 / 130 or e-mailed to: customerservice@topinnovations.com Should there be any missing or defective parts or accessories, contact Customer Support. In most cases, it is not necessary to return the entire unit. We can ship most parts directly to your door.
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. READ ALL INSTRUCTIONS BEFORE USING YOUR STEAM CLEANER 1. DO NOT leave your MC1227 Handheld Steam Cleaner unattended when plugged in or not in use. This unit is not a toy. Close supervision is required when using 2. unit near children, pets, and plants. Steam produced by it is hot and pressurized.
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of electric shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a qualified electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature in any way. 8. MC1227 Handheld Steam Cleaner is only meant to be used with recommended MC1227 accessories.
MC1227 HANDHELD STEAM CLEANER PRODUCT INFORMATION The following features and accessories come with your steam cleaner. Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing parts, refer to the Customer Support section on page 3 of this manual. UNIT FEATURES AND ACCESSORIES 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18.
MC1227 HANDHELD STEAM CLEANER PRODUCT INFORMATION · The Water Reservoir Cap (1) securely covers the opening to the Water Reservoir, safely containing the pressurized steam within the boiler. The Water Reservoir Cap must be removed in order to fill the unit with water. · The Steam Trigger (2) is depressed in order to release a spray of hot, penetrating steam from the unit. · The Handle (3) is designed to stay relatively cool and safe while providing the optimum amount of user comfort.
ASSEMBLY INSTRUCTIONS WARNING: Do not try to connect attachments while unit is emitting steam. ATTACHING STEAM JET NOZZLE 1. Insert cylinder on back of Steam Jet Nozzle (FIGURE 1) into hole on face of main unit (FIGURE 2). Insert it so that two tabs on sides of cylinder (FIGURE 1-A) fit into two tab holes on sides of main hole (FIGURE 2-B). FIGURE 1 FIGURE 2 2. Rotate Steam Jet Nozzle in direction indicated by the “Lock” arrow at rear of nozzle (counter-clockwise).
ASSEMBLY INSTRUCTIONS ATTACHING SQUEEGEE / LARGE UTILITY BRUSH NOTE: While only the Squeegee is illustrated in FIGURES 5-7, the same assembly procedure applies to the Large Utility Brush. 1. Attach Squeegee or Large Utility Brush to Utility Attachment Head by inserting tabs on bottom of Utility Attachment Head (FIGURE 5-A) into slots on bottom of Squeegee or Large Utility Brush (FIGURE 5-B). FIGURE 5 2.
ASSEMBLY INSTRUCTIONS ATTACHING FLEXIBLE STEAM HOSE 1. Identify Male end of the Flexible Steam Hose (FIGURE 9-A). It will have a large cylinder with two tabs on either side. 2. Identify Female end of the Flexible Steam Hose (FIGURE 9-B). It will have a small knob protruding from a cylindrical hole. FIGURE 9 3. Insert cylinder on Male end (FIGURE 10) into hole on face of main unit (FIGURE 11).
USING THE HANDHELD STEAM CLEANER FILLING HANDHELD STEAM CLEANER WITH WATER 1. Place Handheld Steam Cleaner on a flat, level surface. 2. Make sure power cord is unplugged from electrical outlet. 3. Press and hold Steam Trigger to ensure that any remaining steam has been emitted from unit. 4. While still depressing Steam Trigger, cautiously unscrew and remove Water Reservoir Cap. CAUTION: Always press Steam Trigger while unscrewing Water Reservoir Cap.
USING THE HANDHELD STEAM CLEANER OPERATING HANDHELD STEAM CLEANER NOTE: Be sure that Water Reservoir has already been filled and desired attachments are connected before following these steps. 1. Plug power cord into a convenient electrical outlet. Steam Ready Light will immediately illuminate. (Note: Steam Ready Light is illuminated while boiler is heating. This unit has no On/Off power switch.) CAUTION: This unit uses a grounded (3-prong) electrical plug.
CARE AND STORAGE GUIDELINES PROPER STORAGE Preparing your Handheld Steam Cleaner for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below: 1. Unplug power cord from electrical outlet. 2. Allow unit to cool completely (at least 30 minutes). 3. Remove all attachments from unit. 4. Drain any remaining water in Water Reservoir into a sink or tub to prevent overfilling during your next use.
TROUBLESHOOTING GUIDE PROBLEM Unit fails to heat up. Unit heats up, but fails to steam. Steam output is intermittent. 14 POSSIBLE CAUSE SOLUTION Steamer is not plugged in. Plug into electrical outlet. Household Circuit Breaker / Ground Fault Interrupter has tripped or blown a fuse. Reset Circuit Breaker / Ground Fault Interrupter, or replace fuse. If you need assistance, contact a qualified electrician. Mineral buildup in unit. Follow Removing Mineral Buildup procedure on page 13 of this manual.
WARRANTY INFORMATION THREE MONTH LIMITED WARRANTY (If outside USA, additional shipping charges may apply) Top Innovations, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) months from the date of purchase. This warranty does not cover damage caused by misuse, negligence, use by improper current or voltage, use contrary to operating instructions or disassembly, repair or alteration by any person other than Top Innovations, Inc.
Top Innovations, Inc. 400 NW Platte Valley Dr. Riverside, MO 64150 Tel: (800) 711-6617 www.topinnovations.com customerservice@topinnovations.
