MODEL MC1275 Heavy-Duty Steam Cleaner Top Innovations, Inc. 6655 Troost Ave. Kansas City, MO 64131 Tel: (800) 711-6617 (816) 584-9700 www.TopInnovations.com customerservice@topinnovations.com Printed in China by Top Innovations, Inc. V080925 Please read all instructions before use. Mail in your warranty registration card.
LETTER FROM THE CEO Dear Valued Customer, Congratulations on purchasing your new MC1275 Heavy-Duty Steam Cleaner. This powerful product places the natural cleaning power of steam in a convenient appliance that is perfect for use anywhere around the home - inside or out. Plug your Heavy-Duty Steam Cleaner in, and in minutes you are ready to eliminate dirt, grease, grime, stains and more from most anywhere in or around your home.
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. READ ALL INSTRUCTIONS BEFORE USING YOUR HEAVY-DUTY STEAM CLEANER 1. DO NOT overfill unit with water. DO NOT fill Water Reservoir with more than 48 oz. (1,420 ml.) of water. Overfilling may result in burns from spilling water, or possible electrical shock. 2.
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of electrical shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature. TROUBLESHOOTING & CUSTOMER SUPPORT PROBLEM POSSIBLE CAUSE Water spills out from Water Reservoir fill hole when adding water. Water Reservoir is already full.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE SOLUTION Unit fails to steam. Lighted On/Off Switch does not illuminate. Unit is not plugged in. Plug into electrical outlet. Household Circuit Breaker / Ground Fault Interrupter has tripped or blown a fuse. Reset Circuit Breaker / Ground Fault Interrupter, or replace fuse. If you need assistance, contact a licensed electrician. Unit fails to steam. Lighted On/Off Switch does illuminate. Water Reservoir is empty.
HEAVY-DUTY STEAM CLEANER PRODUCT INFORMATION • The Lighted On/Off Switch (1) provides a clear visual indication of whether the unit is powered on. • The Steam Ready Light (2) indicates when the unit is ready to begin steaming. • The Storage Compartment (3) is used for storing small accessories, and houses the Water Reservoir cap. • The Water Reservoir (4) is the tank in which water is stored for use by the unit. It is accessed by removing the Water Reservoir cap found inside the Storage Compartment.
USING THE HEAVY-DUTY STEAM CLEANER ASSEMBLING THE HEAVY-DUTY STEAM CLEANER OPERATING HEAVY-DUTY STEAM CLEANER ATTACHING CARRY HANDLE NOTE: Be sure that Water Reservoir has already been filled and that all desired accessories are connected before following these steps. 1. Insert Carry Handle into Carry Handle hole on top of unit. Please refer to illustration for assistance with proper alignment (FIGURE 1). 2. Use enclosed magnetic screw driver and screw to securely fasten Carry Handle to unit. 1.
ASSEMBLING THE HEAVY-DUTY STEAM CLEANER USING THE HEAVY-DUTY STEAM CLEANER ATTACHING UTILITY BRUSHES FILLING WATER RESERVOIR WITH WATER WARNING: Do not try to connect accessories while unit is emitting steam. This section applies to all Utility Brushes. Note that Utility Brushes attach to Steam Jet Nozzle, not to main steam nozzle. 1. Place Heavy-Duty Steam Cleaner on a flat, level surface. 2.
