MODEL MC1860 Steam Vacuum Top Innovations, Inc. 6655 Troost Ave. Kansas City, MO 64131 Tel: (800) 711-6617 (816) 584-9700 www.steamfast.com customerservice@topinnovations.com Printed in China PRODUCT SERIAL NUMBER For your convenience, you may write down the serial number of your unit (located on the back or bottom of the unit) here for easy reference when contacting our Customer Service Department. ________________ - ______________________________ V050817 by Top Innovations, Inc.
LETTER FROM THE CEO WARRANTY INFORMATION ONE YEAR LIMITED WARRANTY Dear Valued Customer, (If outside USA, additional shipping charges may apply) Congratulations on purchasing your new MC1860 Steam Vacuum. This exciting new product combines the natural cleaning ability of steam with a powerful vacuum to clean your workshop, tools and automobiles like never before! The Steam Vacuum offers three modes of cleaning.
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. READ ALL INSTRUCTIONS BEFORE USING YOUR FABRIC STEAMER 1. DO NOT fill unit with more than 20 oz. of water. Overfilling may result in burns from spilling water, or possible electrical shock. 2. DO NOT leave your MC1860 Steam Vacuum unattended when plugged in or not in use.
TROUBLESHOOTING & CUSTOMER SUPPORT IMPORTANT SAFEGUARDS WARNING: To reduce the risk of electric shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature. PROBLEM Unit fails to operate. Plug into electrical outlet.
CARE AND STORAGE GUIDELINES PROPER STORAGE Preparing your Steam Vacuum for storage is quick and simple. When you have finished your cleaning tasks, follow the steps listed below. STEAM VACUUM PRODUCT INFORMATION The following features and accessories are included with your Steam Vacuum. Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing parts, refer to the Customer Support section on page 14 of this manual. 1.
STEAM VACUUM PRODUCT INFORMATION - The Water Filtration Chamber (1) is where dirt and other vacuumed materials are collected. A minimum of 10 oz. of water should be poured into the Water Filtration Chamber in order to collect dust and other small particles that are picked up by the unit, preventing them from being released back into the air. - The Steam-Vac Switch (2) is switched on in order to allow the unit to emit steam while simultaneously vacuuming.
USING THE STEAM VACUUM ASSEMBLING THE STEAM VACUUM OPERATING STEAM VACUUM CONNECTING / DISCONNECTING HOSE NOTE: Be sure that water reservoir and Water Filtration Chamber have already been filled and that all desired accessories are connected before following these steps. 1. Plug power cord into a convenient electrical outlet (make sure to first remove plastic cover that protects plugs during shipping). CAUTION: This unit uses a grounded (3-prong) electrical plug.
ASSEMBLING THE STEAM VACUUM USING THE STEAM VACUUM CONNECTING OTHER ATTACHMENTS FILLING WATER RESERVOIR WITH WATER INSERTS 1. Slide two locks on top of Vacuum Head to “Open” position (FIGURE 3-A). 2. Select desired insert, and place it into Vacuum Head as shown (FIGURE 3-B). 3. While continuing to press insert firmly into Vacuum Head, slide both locks to “Close” position to lock insert securely into place. 1. Place Steam Vacuum on a flat, level surface. 2.
