MODEL SF-475 Fabric Steamer by Top Innovations, Inc. Please read all instructions before use. Mail in your warranty registration card.
LETTER FROM THE CEO Dear Valued Customer, Congratulations on purchasing your new SF-475 Fabric Steamer. This powerful product is designed to effectively smooth wrinkles and reduce odors with a minimum of time and effort. Turn your Fabric Steamer on, and in minutes you are ready to delicately remove wrinkles from garments, draperies and upholstery. With 1500 Watts of power and a 48 oz. (1420 ml.
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of fire, electrical shock, or injury, the following basic safety precautions should always be followed when using an electrical appliance. READ ALL INSTRUCTIONS BEFORE USING YOUR FABRIC STEAMER 1. Unit Water Reservoir is designed to hold a maximum of 48 oz. (1420 ml.) of water. Use caution when filling, to avoid burns from spilling water, or possible electrical shock. 2. DO NOT leave your SF-475 Fabric Steamer unattended when plugged in or not in use.
IMPORTANT SAFEGUARDS WARNING: To reduce the risk of electrical shock, this appliance has a three-pronged plug. This plug will fit in a polarized wall outlet only one way. If the plug does not fit fully in the outlet, contact a licensed electrician to install a proper outlet. DO NOT attempt to modify the plug or defeat this safety feature. 10. In order to unplug SF-475 Fabric Steamer, grasp plug and pull smoothly and firmly from outlet. DO NOT attempt to unplug unit by pulling or tugging on cord. 11.
FABRIC STEAMER PRODUCT INFORMATION The following features and accessories are included with your Steam Cleaner. Carefully inspect packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible missing parts, refer to the Customer Support section on page 13 of this manual. UNIT FEATURES & ACCESSORIES 1. Pole Top 1a. Steam Nozzle Holder 1b. Clothes Hanger Hook 2. Steam Nozzle 3. Handle 4. Telescopic Pole 4a. Pole Base 5. Hose 5a. Hose Base 6. Steam Ready Light 7.
FABRIC STEAMER PRODUCT INFORMATION • The Pole Top (1) is comprised of the Steam Nozzle Holder (1a) and the Clothes Hanger Hook (1b). The Steam Nozzle Holder provides a safe and convenient place to hang the Steam Nozzle. The Clothes Hanger Hook allows you to steam garments that are hanging from a clean, rust-free hanger. • The Steam Nozzle (2) is designed to spread hot, penetrating steam over a wide area.
ASSEMBLING THE FABRIC STEAMER ATTACHING THE TELESCOPIC POLE 1. Attach Pole Top by sliding it onto top of Telescopic Pole as shown (FIGURE 1). Note that Pole Top must align correctly in two grooves that run the length of pole. 2. Line up grooves of Telescopic Pole with two tabs inside Pole Base hole, and insert bottom section of Pole into Base (FIGURE 2). 3. Tighten knob by turning it in a clockwise direction until it is tight, and Telescopic Pole sits firmly in place in the Pole Base (FIGURE 3).
ASSEMBLING THE FABRIC STEAMER CONNECTING HOSE 1. Slide Hose fitting onto threaded Hose Base (FIGURE 5) 2. Turn Hose fitting clockwise to secure it to Hose Base (FIGURE 6). NOTE: Hand-tighten Hose fitting only. Do not over-tighten. 3. Hang Steam Nozzle on specially designed Steam Nozzle Holder as shown (FIGURE 7). CAUTION: To prevent steam from causing bodily injury or damage to surfaces, always hang Steam Nozzle on Steam Nozzle Holder when not in use.
USING THE FABRIC STEAMER FILLING WATER RESERVOIR WITH WATER 1. Place Fabric Steamer on a flat, level surface. 2. Make sure Lighted On/Off Switch is set to “Off” position and grounded power cord is unplugged from electrical outlet. 3. Flip up Compartment Lid. Cautiously unscrew and remove Water Reservoir Cap. 4. Water Reservoir should always be emptied after each use. If it was not emptied after the last use, empty it now. This will prevent over-filling. 5. Fill Measuring Cup to maximum fill line (16 oz.
USING THE FABRIC STEAMER OPERATING THE FABRIC STEAMER NOTE: Be sure that any desired attachments are connected and Water Reservoir is filled before following these steps. 1. Plug grounded power cord into a convenient 3-prong electrical outlet. 2. Switch Lighted On/Off Switch to “On” position. 3. Steam Ready Light will illuminate while boiler is heating. When Steam Ready Light deactivates (2-8 minutes, depending on amount of water in Water Reservoir) unit will automatically begin emitting steam. 4.
CARE & STORAGE GUIDELINES PROPER STORAGE Preparing your Fabric Steamer for storage is quick and simple. When you have finished your steaming tasks, follow the steps listed below. 1. Unplug grounded power cord from electrical outlet. 2. Allow unit to cool completely (at least 30 minutes). 3. Remove all attachments from unit. 4. Drain any remaining water in Water Reservoir into a sink or tub to prevent over-filling during your next use. 5.
TROUBLESHOOTING GUIDE PROBLEM Unit fails to steam. Lighted On/Off Switch does not illuminate. SOLUTION Unit is not plugged in. Plug into electrical outlet. Household Circuit Breaker / Ground Fault Interrupter has tripped or blown a fuse. Reset Circuit Breaker / Ground Fault Interrupter, or replace fuse. If you need assistance, contact a licensed electrician. Water Reservoir is empty. Refill Water Reservoir using procedures on page 9 of this manual. Mineral build-up in unit.
TROUBLESHOOTING & CUSTOMER SUPPORT PROBLEM Water spills out from Water Reservoir fill hole when adding water. SOLUTION POSSIBLE CAUSE Water Reservoir is already full. Do not try to add any more water. Water Reservoir is too hot to be refilled. Allow more cooling time before refilling. Fill Water Reservoir more slowly. Be sure to utilize the provided Measuring Cup and Water Funnel to refill the unit. Accessories do not stay firmly attached to Steam Nozzle.
Top Innovations, Inc.
WARRANTY INFORMATION ONE YEAR LIMITED WARRANTY (If outside USA, additional shipping charges may apply) Top Innovations, Inc. warrants this product to be free from defects in material and workmanship for a period of one (1) year from the date of purchase. This warranty does not cover damage caused by misuse, negligence, use by improper current or voltage, commercial use, use contrary to operating instructions or disassembly, repair or alteration by any person other than Top Innovations, Inc.
Top Innovations, Inc. 6655 Troost Ave. Kansas City, MO 64131 Tel: (800) 711-6617 (816) 584-9700 www.steamfast.com customerservice@topinnovations.com Printed in China PRODUCT SERIAL NUMBER For your convenience, space has been provided below for you to record the serial number of your unit (located on the back or bottom of the unit) for easy reference when contacting our Customer Service Department.