Your Work Never Looked Better 7Elr/7Elr+ USER MANUAL TABLE OF CONTENTS ENGLISH FOR YOUR SAFETY -------------------------------------------------- 1 SAFETY PRECAUTIONS -------------------------------------- 2 DEUTSCH BEFORE YOU OPERATE THE MONITOR ---------------------FEATURES -------------------------------------------------------PACKING LIST --------------------------------------------------INSTALLATION INSTRUCTIONS --------------------------CONTROLS AND CONNECTORS -------------------------- 3 3 3 FRA
Before thefor monitor please read Series this manual thoroughly. This Plug & operating Play Drivers the AOC Spectrum Monitors are available manual should be retained for future reference. at AOC’s Web Site: www.aoc-europe.com FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.
PRECAUTIONS ? Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. ? Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
BEFORE YOU OPERATE THE MONITOR FEATURES FEATURES ? ? ? ? ? ? 43.2cm(17”) Color Monitor Crisp, Clear Display for Windows Supports Resolutions up to 1600 ? 1200 Power Management Ergonomic Design (MPR II Approved) Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE MONITOR PACKAGE The product package should include the following items: 1. Monitor 2. Owner's Manual 3. Power Cord 4. Swivel Base 5. Audio Cable/DC Power Cable ( For 7GlrA only ) INSTALLATIONINSTRUCTIONS INSTRUCTIONS INSTALLATION .
7Glr Figure 1 7GlrA Installing and Removing the Swivel Base POWER CORD Power Source: 1. Make sure the power cord is the correct type that required in your area. 2. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area ( No user adjustment is required. ) 3. Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet.
Glr Figure 2 1. 2. 3. Power Cord Signal Cable VGA Card Adapter 7GlrA Connecting Cables 4. 5.
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. ? The power cord should be connected. ? Connect the video cable from the monitor to the video card. ? To turn the monitor on, press the stand by power switch to ON position. The power indicator will light up.
4.
FRONT PANEL CONTROL ? Standby power key : When pressed, the monitor enters the off mode, and the LED turns orange. Press again and hold to restore normal status. ? Shuttle Knob : The Shuttle Knob is used to control the monitor functions. Rotate to switch functions or adjust settings. Press to select or execute a function . ? OSD Key : The OSD Key is used to activate the OSD window, or to exit the OSD window and save the settings. ? Power Indicator : Green — Orange — Power On mode.
HOW TO ADJUST A SETTING 1. Press the Shuttle Knob or OSD Key to make the OSD window appear. See figure 4. 2. Rotate the Shuttle Knob to select the desired function. See figure 4. 3. Press the Shuttle Knob again to select the function that you want to adjust. 4. Rotate the Shuttle Knob to change the settings of the current function. 5. When the OSD window is active, it shows the input signal timing. The "H" stands for the horizontal frequency and "V" for the vertical frequency. 6.
6. V- SIZE Adjust the picture’s vertical size. 7. ZOOM Adjust the picture’s horizontal and vertical size simultaneously. 8. PINCUSHION Adjust the pincushion and barrel 9. TRAPEZOID Adjust the picture’s trapezoid distortion. 10. PIN-BALANCE Adjust to compensate the pincushion unbalance. 11. PARALLELOGRAM Adjust the picture to be a rectangle. 12. ROTATION Adjust the picture tilt to horizontal position. 13. 6500°K/9300°K ( COLOR TEMPERATURE ) 14. USER COLOR ( Red / Blue ) 15.
19. SELECT LANGUAGE Select the language you like.
POWER MANAGEMENT FEATURE The power management feature of this product complies with every power saving requirements of ENERGY STAR? and VESA DPMS when activated, it automatically reduces unnecessary power consumption of the monitor when your computer is not in use. To use the feature, the monitor needs to be connected to a VESA DPMS computer. There are three power management modes available, these are described below. The required settings, including the timer setting, should be made by the computer.
FEATURES Green monitor ? The monitor has a power saving function that conforms to the VESA DPMS standard. This feature will only work if your PC is a green PC. This feature is similar to a screen saver, except that your monitor will turn it off instead of activating the screen saver. To activate this feature in Windows ® 98 : In Windows ® 98, this feature can be activated and customized under the screen saver setting of the display properties. 1. Right click on the desktop and choose Properties. 2.
THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL. This monitor meets the Power Management standards as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees ( NUTEK ).
TECHNICAL SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play No picture Picture is fuzzy Picture bounces or a wave pattern is present in the picture Monitor is stuck in “Power Saving Mode” Missing one of the primary colors (RED, GREEN, or BLUE) Possible Solution *Power Cord should be connected *Check if the PC system is Plug & Play compatible *Check if the Video Card is Plug & Play compatible *Check if the D-15 plug pin of Video Cable is bent *Make sure the AOC Monitor Drivers are insta
APPENDIX SPECIFICATIONS CRT Size 43.2cm(17"), 90ºdeflection, 29mm neck, CRT Viewable Image 40.6cm (16"), diagonal Size Type 0.25mm dot pitch. Video 0.7Vpp, R,G,B Analog Input Separate Sync. TTL Level H./V.- Sync. Positive / Negative Scanning H-Frequency 30kHz – 95kHz Frequency V-Frequency 50Hz-160Hz Max.
410 420 402 (ln mm) 7Glr 18
? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? Switch External Controls: Plug & Play Power Management Power Consumption Pre-set Display Area Audio Output (for 7GlrA only) Regulatory Compliance Functions Shuttle Knob Standby Power Switch OSD Key Volume(7GlrA) Contrast Brightness H-Center H-Size V-Center V-Size Zoom Pincushion Trapezoid Pin-Balance Parallelogram Rotation 6500°K User Color 9300°K Degauss Moire Reduce Recall Exit Select Language DDC1/2B EPA, VESA DPMS 120 Watts 300mm x 230mm Rated Power
410 420 440 (ln mm) 307 305 7GlrA FACTORY PRESET TIMING TABLE STANDARD RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY VGA 720 × 400 31.46kHz 70Hz VGA 640 × 480 31.46kHz 60Hz VESA/85 640 × 480 43kHz 85Hz VESA/85 800 × 600 53.6kHz 85Hz VESA/85 1024 × 768 68.8kHz 85Hz VESA/85 1280× 960 85.938kHz 85Hz VESA/85 1280× 1024 91.14kHz 85Hz VESA/75 1600× 1200 93.75kHz 75Hz CONNECTOR PIN ASSIGNMENT 1 6 10 5 11 15 15 - Pin Color Display Signal Cable PIN NO.
1. 2. 3. 4. 5. 6. 7. 8. Red Green Blue Ground Ground R-Ground G-Ground B-Ground 9. 10. 11. 12. 13. 14. 15.
LIMITED THREE-YEAR WARRANTY* for AOC Spectrum Color Monitors sold within Europe AOC International (Europe) GmbH warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) GmbH will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below.
This limited warranty does not cover any of the product firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration. ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE.
