User's Manual

9
The power management feature of this product complies with every power
saving requirements of ENERGY STAR
?
and VESA DPMS when activated, it
automatically reduces unnecessary power consumption of the monitor when
your computer is not in use.
To use the feature, the monitor needs to be connected to a VESA DPMS
computer. There are three power management modes available, these are
described below. The required settings, including the timer setting, should be
made by the computer.
? Stand-by Mode
When the H-sync signal from the computer is off, the monitor enters into
Stand-by Mode which reduces the power consumption to less than 15W. The
screen becomes dark, and the power indicator turns to orange. From Stand-
by Mode, the screen reappears instantaneously when the keyboard or the
mouse is touched again.
? Suspend Mode
When the V-sync signal from the computer is off, the monitor enters into
Suspend Mode which reduces the power consumption to less than 15W. The
screen becomes dark, and the power indicator turns to orange. From
Suspend Mode, the screen reappears instantaneously when the keyboard or
the mouse is touched again.
? Active-off Mode
When both the H and V sync signals from the computer are off, the monitor
enters into Active-off Mode which reduces the power consumption to less
than 5W. The screen becomes dark, and the power indicator turns to orange.
From Active-off Mode, the screen reappears instantaneously when the
keyboard or the mouse is touched again.
? The power-saving mode can be indicated by the light-emitting diode (LED)
on the front panel:
Signal Power
Mode
Cable H-Sync V-Sync Video Indicator Consumption
On*
Attached Yes Yes Active Green
? 120 W
Stand-by Attached No Yes Blank Orange
? 15 W
Suspend Attached Yes No Blank Orange
? 15 W
Off Attached No No Blank Orange
? 5 W
POWER MANAGEMENT FEATURE