User's Manual

10
FEATURES
Green monitor
? The monitor has a power saving function that conforms to the VESA DPMS
standard. This feature will only work if your PC is a green PC. This feature is
similar to a screen saver, except that your monitor will turn it off instead of
activating the screen saver.
To activate this feature in Windows
®
98 :
In Windows
®
98, this feature can be activated and customized under the screen
saver setting of the display properties.
1. Right click on the desktop and choose Properties.
2. Click on the tab that says Screen Saver. If your system supports Green PC,
there will be a section entitled “Energy Saving Features of Monitor.” If there
isn’t a section like that, then your PC does not support Green Monitor. The
monitor will behave just like a normal monitor, so you will have to turn it off
manually to save energy.
3. In the “Energy Saving Features of Monitor” sections are two boxes, Standby
and Shut off. To activate either one, click the box next to each one.
4. You can specify the amount of inactive time before your monitor enters
standby mode or shuts off.
Plug & Play DDC1/2B Feature
This monitor is equipped with VESA DDC1/2B capabilities according to the
VESA DDC STANDARD. It allows the monitor to inform the host system of its
identity and, depending on the level of DDC used, communicate additional
information about its display capabilities. The communication channel is defined
in two levels, DDC1 and DDC2B.
The DDC1 is a unidirectional data channel from the display to the host that
continuously transmits EDID information. The DDC2B is a bidirectional data
channel based on the I²C protocol. The host can request EDID information over
the DDC2B channel.
PLUG AND PLAY