User's Manual

ManualsBrandsTop Victory Electronics ManualsComputers & Accessories17" Color Monitor

Your Work Never Looked Better

F1795+

USER MANUAL

TABLE OF CONTENTS

FOR YOUR SAFETY -------------------------------------------------- 1

SAFETY PRECAUTIONS -------------------------------------- 2

BEFORE YOU OPERATE THE MONITOR ---------------------- 3

FEATURES -------------------------------------------------------- 3

PACKING LIST --------------------------------------------------- 3

INSTALLATION INSTRUCTIONS --------------------------- 3

CONTROLS AND CONNECTORS -------------------------- 4

OPERATING INSTRUCTIONS ------------------------------------- 5

GENERAL INSTRUCTIONS ---------------------------------- 5

HOW TO ADJUST A SETTING ------------------------------ 7

ADJUSTING THE PICTURE ---------------------------------- 7

POWER MANAGEMENT FEATURE ----------------------- 9

PLUG AND PLAY ------------------------------------------------ 10

TECHNICAL SUPPORT(FAQ) ------------------------------------- 12

APPENDIX --------------------------------------------------------------- 13

SPECIFICATIONS --------------------------------------------13-14

FACTORY PRESET TIMING TABLE ---------------------- 15

CONNECTOR PIN ASSIGNMENT ------------------------- 15

LIMITED THREE-YEAR WARRANTY -------------------------16-17

Thank you very much for choosing the AOC Pure Flat Color Monitor.

We recommend that you take a few minutes to read carefully through this brief

but comprehensive manual before installing and switching on the monitor.

Please keep this manual in a safe place for you future reference.

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

Summary of content (16 pages)

PAGE 1
Your Work Never Looked Better F1795+ USER MANUAL TABLE OF CONTENTS ENGLISH FOR YOUR SAFETY -------------------------------------------------- 1 SAFETY PRECAUTIONS -------------------------------------- 2 DEUTSCH BEFORE YOU OPERATE THE MONITOR ---------------------FEATURES -------------------------------------------------------PACKING LIST --------------------------------------------------INSTALLATION INSTRUCTIONS --------------------------CONTROLS AND CONNECTORS -------------------------- 3 3 FRANÇAIS 3
PAGE 2
Before the monitor read this manual thoroughly.are This manual Plug &operating Play Drivers for the please AOC Spectrum Series Monitors available should be retained for future reference. at AOC’s Web Site: www.aoc-europe.com FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PAGE 3
PRECAUTIONS l Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement. l Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
PAGE 4
BEFORE YOU OPERATE THE MONITOR FEATURES FEATURES • • • • • • 43.2cm(17”) Pure Flat Color Monitor Crisp, Clear Display for Windows Recommened Resolutions: 1024 X 768 @60Hz EPA ENERGY STAR® Ergonomic Design (MPR II Approved) Space Saving, Compact Case Design CHECKING THE CONTENTS OF THE MONITOR PACKAGE The product package should include the following items: 1. Monitor 2. Owner's Manual 3. Power Cord 4. Swivel Base 5.
PAGE 5
POWER CORD Power Source: 1. Make sure the power cord is the correct type that required in your area. 2. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area ( No user adjustment is required. ) 3. Connect the power cord into your monitor’s power input socket, and then plug the other end into a 3-pin AC power outlet.
PAGE 6
OPERATING INSTRUCTIONS GENERAL INSTRUCTIONS The other control knobs are located at the base of the monitor (See Figure 3). By changing these settings, the picture can be adjusted to your personal preferences. • The power cord should be connected. • Connect the video cable from the monitor to the video card. • To turn the monitor on, press the stand by power switch to ON position. The power indicator will light up.
PAGE 7
FRONT PANEL CONTROL • Standby power key : When pressed, the monitor enters the off mode, and the LED turns orange. Press again and hold to restore normal status. • Shuttle Knob : The Shuttle Knob is used to control the monitor functions. Rotate to switch functions or adjust settings. Press to select or execute a function . • OSD Key : The OSD Key is used to activate the OSD window, or to exit the OSD window and save the settings. • Power Indicator : Green — Orange — Power On mode.
PAGE 8
HOW TO ADJUST A SETTING 1. Press the Shuttle Knob or OSD Key to make the OSD window appear. See figure 4. 2. Rotate the Shuttle Knob to select the desired function. See figure 4. 3. Press the Shuttle Knob again to select the function that you want to adjust. 4. Rotate the Shuttle Knob to change the settings of the current function. 5. When the OSD window is active, it shows the input signal timing. The "H" stands for the horizontal frequency and "V" for the vertical frequency. 6.
PAGE 9
6. V- SIZE Adjust the picture’s vertical size. 7. ZOOM Adjust the picture’s horizontal and vertical size simultaneously. 8. PINCUSHION Adjust the pincushion and barrel 9. TRAPEZOID Adjust the picture’s trapezoid distortion. 10. PIN-BALANCE Adjust to compensate the pincushion unbalance. 11. PARALLELOGRAM Adjust the picture to be a rectangle. 12. ROTATION Adjust the picture tilt to horizontal position. 13. 6500°K/9300°K ( COLOR TEMPERATURE ) 14. USER COLOR ( Red / Blue ) 15.
PAGE 10
PLUG AND PLAY Plug & Play DDC1/2B Feature This monitor is equipped with VESA DDC1/2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The communication channel is defined in two levels, DDC1 and DDC2B. The DDC1 is a unidirectional data channel from the display to the host that continuously transmits EDID information.
PAGE 11
TECHNICAL SUPPORT (FAQ) Problem & Question Power LED is not on No Plug & Play Picture is fuzzy Picture bounces or a wave pattern is present in the picture The power LED is ON (orange) but there’s no video or no picture.
PAGE 12
APPENDIX SPECIFICATIONS CRT Size CRT Viewable Image Size Type Video Separate Sync. H./V.- Sync. H-Frequency V-Frequency Input Scanning Frequency Max. Resolution Video Dot Rate Factory Preset mode : User Programmable mode : Plug & Play EPA ENERGY STAR® ON Mode OFF Mode Dimension: Monitor & Base Weight F1795+: Unit (net) 7KlrA: Unit (net) Signal Cable: 43.2cm(17"), Pure Flat and 90º deflection, 29mm neck, 40.6cm (16"), diagonal 0.25mm dot pitch. 0.
PAGE 13
• • • • • • • • • • • • • • • • • • • • • • • • Switch External Controls: Functions Plug & Play Power Management Power Consumption ( Maximum ) Pre-set Display Area Audio Output (for 7GlrA only) Regulatory Compliance Shuttle Knob Standby Power Switch OSD Key Volume(7KlrA) Contrast Brightness H-Center H-Size V-Center V-Size Zoom Pincushion Trapezoid Pin-Balance Parallelogram Rotation 6500°K User Color 9300°K Degauss Moire Reduce Recall Exit Select Language DDC1/2B EPA, VESA DPMS 120 Watts 300mm x 230mm
PAGE 14
FACTORY PRESET TIMING TABLE STANDARD RESOLUTION HORIZONTAL FREQUENCY VERTICAL FREQUENCY VGA 720 × 400 31.46kHz 70Hz VGA 640 × 480 31.46kHz 60Hz VESA/85 640 × 480 43kHz 85Hz VESA/85 800 × 600 53.6kHz 85Hz VESA/85 1024 × 768 68.8kHz 85Hz VESA/85 1280× 960 85.938kHz 85Hz VESA/85 1280× 1024 91.14kHz 85Hz VESA/75 1600× 1200 93.75kHz 75Hz CONNECTOR PIN ASSIGNMENT 1 5 6 10 11 15 15 - Pin Color Display Signal Cable PIN NO. 1. 2. 3. 4. 5. 6. 7. 8. DESCRIPTION PI N NO.
PAGE 15
LIMITED THREE-YEAR WARRANTY* for AOC Spectrum Color Monitors sold within Europe AOC International (Europe) GmbH warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) GmbH will, at its option, either repair the defective product with new or rebuilt parts, or replace it with a new or rebuilt product at no charge except as *stated below.
PAGE 16
that you or any third party have modified or altered; you bear the sole responsibility and liability for any such modification or alteration. ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE) ARE LIMITED IN DURATION TO A PERIOD OF THREE (3) YEARS FOR PARTS AND LABOR FROM THE ORIGINAL DATE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR IMPLIED) APPLY AFTER THIS PERIOD.