User's Manual

12
Picture Quality Adjustment
Your PDP has the following setup options which allow you to
improve the picture quality.
Brightness, contrast, sharpness, color, tint (only for NTSC), and
color temperature.
When the Picture is selected, you can adjust the following items:
1. Press MENU button to display the menu operation interface
on the screen.
2. Press ADJ+/ADJ- button to select Picture menu. Then press
ENTER again to enter Picture submenu (selected item glows
green).
3. Press ADJ+/ADJ- button to select the item you need then
press ENTER button again to enter the selected
adjustment submenu (Now the item glows red).
4. Adjustment items… Press ADJ+/ADJ- …
Brightness Increase or decrease
Contrast
Sharpness
Color
Tint
Color Temperature Select desired color temperature
（Normal, cold, warm）
5. If you are satisfied with your setup, press ENTER button
again to complete menu setup (selected adjustment item
glows green again).
PICTURE
BRIGHTNESS 08
CONTRAST 16
SHARPNESS +00
COLOR 16
TINT +00
COLOR TEMPERATURE NORMAL
EXIT MENU
: SELECT MAIN MENU ：OK
PICTURE
BRIGHTNESS 08
CONTRAST 16
SHARPNESS +00
COLOR 16
TINT +00
COLOR TEMPERATURE NORMAL
EXIT MENU
SELECT ITEM ：OK
PICTURE
BRIGHTNESS 08
CONTRAST 16
SHARPNESS +00
COLOR 16
TINT +00
COLOR TEMPERATURE NORMAL
EXIT MENU
: ADJUSTMENT ：OK
PICTURE
BRIGHTNESS 08
CONTRAST 16
SHARPNESS +00
COLOR 16
TINT +00
COLOR TEMPERATURE NORMAL
EXIT MENU
SELECT ITEM ：OK
PICTURE
BRIGHTNESS 08
CONTRAST 16
SHARPNESS +00
COLOR 16
TINT +00
COLOR TEMPERATURE NORMAL
EXIT MENU
: ADJUSTMENT ：OK