User's Manual

18
TV Setup Operations
You can use your PDP in many different countries. Each country
has its own TV broadcast standard. You can select the TV system
you need in the TV Setting menu based on the TV standard of
your count
r
y.
User CH
The user can setup the TV channels to a mode that he/she is more
familiar with.
CH Fine Tune/Auto Fine Tune
In some areas with weaker TV signals, you can use this function
to modify and correct the signal to obtain a better picture on the
screen.
1. Press the MENU button to display the menu operation
interface on the screen.
2. Press the ADJ+/ADJ- button to select the TV Setup menu and
then press ENTER button.
3. Press the ADJ+/ADJ- button to select the item you wish to
adjust and then press the ENTER button to enter the selected
item (now the item glows red).
4. Adjustment Item… Press ADJ+/ADJ- …
System Setup Select the item to adjust
（The adjusting method is the same as the menu operation.）
CH Fine Tune Increase or decrease
Auto Fine Tune On or off
MTS Select “Mono”
、 “Stereo”、“Sap”
V Chip Setup The V-Chip reads information
encoded in the rated program and
blocks programs from the set based
upon the rating selected by the
parent.
C.C Setup Setting the caption to turn on or off
5. If you are satisfied with the setup, press the ENTER button
again to complete the setup (the selected adjustment item
glows green again).
When you use the PDP’s TV function the first time, we
recommend channel scanning after selecting the required TV
system. This lets you to watch more and higher quality TV
programs.
If the signal is weaker in the area you live, we recommend you
use the auto channel scanning.
1. Press the MENU button to display the menu operation
interface on the screen.
2. Press the ADJ+/ADJ- button to select the TV Setup menu and
then press ENTER button.
3. Press the ADJ+/ADJ- button to select CH Mapping option
and then press ENTER button to enter the CH Mapping
adjustment item.
4. Press the ADJ+/ADJ- button again to select the Channel Scan
option and then press ENTER button. This item glows red.
5. Press the ADJ+/ADJ- button to select “on” and then press the
ENTER button. The system turns on the channel scanning
function.
TV SETUP
USER CH 10
SYSTEM SETUP
CH MAPPING
CH FINE TUNE +00
AUTO FINE TUNE OFF
MTS MONO
V CHIP SETUP
C.C SETUP
EXIT MENU
: SELECT MAIN MENU ：OK
SYSTEM SETUP
COLOR SYSTEM NTSC
SOUND SYSTEM M
FREQUENCY TYPE CABLE TV
EXIT MENU
SELECT ITEM ：OK
TV SETUP
USER CH 2
SYSTEM SETUP
CH MAPPING
CH FINE TUNE +00
AUTO FINE TUNE OFF
MTS MONO
V CHIP SETUP
C.C SETUP
EXIT MENU
SELECT ITEM ：OK
TV SETUP
USER CH 2
SYSTEM SETUP
CH MAPPING
CH FINE TUNE +00
AUTO FINE TUNE OFF
MTS MONO
V CHIP SETUP
C.C SETUP
EXIT MENU
SELECT ITEM ：OK