User's Manual

20
Troubleshooting
If the picture quality is poor or there is some other problem, check the adjustments, operations, etc., before requesting
service.
Symptom Checks Remedy
Picture appears but no sound is y Is the volume set at the minimum? y Increase the volume.
Produced. y Is the mute mode set?
y Are the speakers properly connected?
y Press the remote control’s MUTE button.
y Connect the speakers properly.
y Is AUDIO INPUT set correctly? y Set AUDIO INPUT on the SOUND menu
correctly.
Poor picture with VIDEO signal
input.
y Improper control setting.
Local interference.
Cable interconnections.
Input impedance is not correct level.
y Adjust picture control as needed.
Try another location for the tv.
Be sure all connections are secure.
Specifications
Input Signals RGB, NTSC, PAL, HD*1, DVD*1, DTV*1
Input Terminals
RGB ANALOG RGB: 1 * mini D-sub 15-pin
DIGITAL RGB: 1 * DVI-D 29-pin
(Not compatible with analog input)
Video COMPOSITE VIDEO: 1 * RCA
S-Video: 1 * DIN 4-pin
COMPONENT VIDEO ( YCbCr ) 3 * RCA
DTV COMPONENT VIDEO ( YPbRr ) 3 * RCA
Audio Stereo RCA × 3(selectable)
RS232C control D-sub 9-pin × 1
Audio output Internal 5W + 5W at 16 ohm / External (option) 10W + 10W at 8 ohm
OSD Functions Picture (Brightness / Contrast / Sharpness / Color / Tint / Color temperature),
Display (Position / Size / Picture mode / PIP setup / Clock / Focus / Auto focus),
Sound (Bass / Treble / Balance / Speaker / Audio 1 input / Audio 2 input / Audio 3 input &
output ),
Function (OSD / Power saving / White Screen / Reset),
Configuration (Language / Component input / RGB source / DB15 source / Color system),
Information (Main source / Second source)
TV setup(User ch / System setup / Ch mapping / Ch fine tune / MTS ./ V chip setup /
CC setup)
Other features 3D motion adaptive Scan Converter with 2-2 (50Hz), 2-3 (60Hz) Pull Down Converter,
Accessories AV cable, User’s Manual (about TV part )