User's Manual

8
Installation
Connecting Your VCR or Laser Disc Player
Use common RCA cables to connect your VCR or laser disc player to your plasma tv. To make these connections,
simply:
1. Turn off the power to your plasma tv and VCR or laser disc player.
2. Connect one end of your RCA video to the video output connector on the back of your VCR or laser disc player,
connect the other end to the Video input on your plasma tv. Use standard RCA audio patch cords to connect the
audio from your VCR or laser disc player to your plasma tv (if your VCR or laser disc player has this capability).
Be careful to keep your right and left channel connections correct for stereo sound.
3. Turn on the plasma tv and the VCR or laser disc player.
Note: Refer to your VCR or laser disc player owner’s manual for more information about your equipment’s
video output requirements.
Connecting TV system
Use 75Ω standard coaxial cable to your plasma TV, To receive TV program.
For reduce noise of the RF signal level then we suggest that custom uses shielding coaxial cable to get good quality of
signal. To make these connections, simply:
1. Turn off the power to your plasma tv.
2. Connect one end of your coaxial cable to the RF input on your plasma tv.
3. Turn on the plasma tv.
此图中的单词
Power
Tuner
R 3 L 3
R 2 L 2
S-Video
R 1 L 1
AV-In
AV-Out
Y
Pb
Pr
AC IND - SU B RS - 232CDVI
Cable TV