User's Manual

Installation

Connections with Equipment that has a Digital Interface

Connections can be made with equipment that is equipped with a digital interface compliant with the DVI (Digital

Visual Interface) standard.

* Use a DVI 29-pin signal cable when making connections to the DVI connector of the main unit.

Note that the DVI terminal does not support analog RGB input source and HDCP protocol.

Note:

1. Input TMDS signals conforming to DVI standards. The TMDS input corresponds to single link.

2. To maintain display quality, use a cable with quality prescribed by DVI standards that is within 5 meters in

length.

3. RS-232C Only use in factory setting.