User's Manual

4
WARNING
NOTES
Do not obstruct the Plasma Display’s ventilation holes. If the ventilation holes are covered, the heat sill build
up inside, and this could lead to fire. For example, do not install the Plasma Display in narrow spaces where
ventilation is poor, do not place covers over it, etc.
Do not install the Plasma Display neat air conditioner air outlets or in places where vibrations are strong.
Doing so could lead to fire or electric shock.
Do not install the Plasma Display in humid or dusty places or places exposed to soot or vapor (such as in
kitchens, near humidifiers, etc.). Doing so could lead to fire.
When installing the Plasma Display, leave sufficient space around it,
as shown in the diagram. Failure to do so could cause heat to build up inside, leading to fire.
Hold the Plasma Display securely when mounting the units on it. Failure to do so could cause the Plasma
Display to fall, resulting in injury.
When installing the Plasma Display on a stand with casters, be sure to block the casters, If the stand should
move, the Plasma Display could fall, resulting in injury.
The Plasma Display is heavy, so be sure to install in a stable place and take measures to prevent it from
tipping over and causing injury. The Plasma Display has a high center of gravity. It should be unpacked and
moved by a minimum of two people, holding it at the top and bottom. Failure to do so could cause the
Plasma Display to fall, resulting in injury.
NOTES
Keep the product away from moisture:
Do not expose this appliance to rain or moisture.
If water penetrates into the product, stop the operation; unplug the connector and contact with the
Service Center. Continuous use in this case may result in fire or electric shock.
Do not place any objects on the top of the product:
Spilled water or metal objects may cause short circuit, fire or electric shock if they penetrate into the
housing of the product.
Never use a damaged power cord:
Heavy objects, heat or tensile force may damage the power cord and cause fire or electric shock.
Do not change or open the back cover: Removing the back cover of the product may cause fire or
electric shock.
Contact the Service Center when inspection or adjustment is required.
Do not use the product if any abnormality occurs:
If any smoke or odor becomes apparent, unplug the connector and contact the Service Center
immediately. Do not try to repair the product by yourself.
Avoid using dropped or damaged appliances:
If the product is dropped and the housing is damaged, the internal components may function
abnormally. Unplug the connector immediately and contact the Service Center for repair.
Continuous use of the product may cause fire or electric shock.
Do not touch the power cord during lightening:
To avoid electric shock, avoid handling the power cord during electrical storms.
50mm
50mm
31mm
31mm
50mm