User's Manual

14
V-CHIP SETUP
Select V-Chip on OSD then enter 4 digits of pin number.
l Initial pin number is “0000”.
l If you enter an incorrect pin number “Incorrect” message will be
displayed.
It is the parental control function (V-chip). It is used to block program viewing
based on the ratings by the broadcaster. The default setting is to allow all
programs to be viewed. Viewing can be blocked by the type of program and
by the categories chosen be blocked. It is also possible to block all program
viewing for a time period.
A. There are two item could be defined. One is TV Guidelines another
one is Movie Guidelines.
B. Setting up TV Guidelines
l Use Up/Down arrow buttons to move around the matrix and
press Right arrow button to change the value form “U” to “B”
or ” B” to ”U”
l U: Unblock
B: Block