User's Guide
www.topvme.com
12
CARD READER
7-2. Functional mode
7-2-1. General mode:
Normally boot into normal mode.
7-2-2. Channel setting :
Press the yellow button and reboot to enter this mode, the RF
communication has 31 channel to choose from. After entering the mode,
use the yellow and green buttons to select the channel, and the blue
button to confirm .
7-2-3. Information:
Press the blue button and reboot to enter this mode to access the device
number and program version number.
7-2-4. Signal setting mode:
Press the green button and reboot to enter this mode, Use the yellow
and green buttons to select between pulse or hopper mode, and the
blue button to confirm .
7-2-5. RFID setting:
Press the red button and reboot to enter this mode. Use the yellow
button to select, and the blue button to confirm.
7-3. Display description
Display Narrative
Credit Card balance
Rate Key in rate :1、10、All
Play Key in value
★ Hopper Mode、Normal communication
☆ Hopper Mode、No communication
● PulseMode、Normal communication
○ Pulse Mode、No communication
CH(0~31) RF channel