User's Guide

www.topvme.com
14
CARD READER
Operational Description
Tx Standby
1. CMS100 power on .
2. General mode: Normally boot into normal mode .
3. Channel setting :
Press the yellow button and reboot to enter this mode, the RF
communication has 31 channel to choose from. After entering the mode, use
the yellow and green buttons to select the channel, and the blue button to
confirm .
4. Information:
Press the blue button and reboot to enter this mode to access the device
unique code and program version number .
5. Signal setting mode:
Press the green button and reboot to enter this mode, Use the yellow
and green buttons to select between pulseor hopper mode, and the blue
button to confirm .
6. RFID setting:
Press the red button and reboot to enter this mode. There are 4 values
to choose from. Use the yellow button to select, and the blue button to
confirm .
7. Waiting for the command of controller .
Link
1. CMS100 sends the command to controller.
2. Communication with controller continuously.