Operation Manual

Butler 1410C
63
ENGLISH
6363
4.10. Call Duration Indicator on the Display
During a call the call duration appears on the display (hours:minutes:seconds).
E.g. " 01:02:30" for 1 hour, 2 minutes and 30 seconds.
The call duration remains visible on the display for 5 seconds after each call.
4.11. Locking the key pad
If you lock the alphanumeric keypad, it is impossible to dial a telephone
number. Only the softkeys can still be used.
Switching on Call Barring
- Press the Menu key.
- Press the '*' key.
- 'KEYGUARD ON' appears on the display.
Switching off Call Barring
- Press the first softkey.
- Press the '*' key.
- 'KEYGUARD OFF' appears on the display.
4.12. Turning off the microphone (mute)
It is possible to turn off the microphone during a call by pressing the Mute key.
Now you can speak freely without the caller being able to hear you.
- During a call press the Mute key.
- ‘MIC OFF’ appears on the display and the handset sounds a beep.
- When you would like to resume the conversation, press the Mute key again.
4.13. Pause key
If you dial a telephone number and you would like to add a pause to this
number, press the Pause key /P at the desired place in the number.
When you call this number, this pause (3 seconds) is automatically included.
Note: the length of the pause can be set (see 4.21. Setting pause length). You can only
add a pause during dial preparation or while you are programming memory numbers!
4.14. Using the alphanumeric keypad
Use the alphanumeric keypad to type text. To select a letter, press the
corresponding key. E.g. if you press the alphanumeric key '5', the first
character (j) appears on the display. Press it repeatedly to select other
characters from this key.
63