BUTLER 3300/TWIN/ TRIPLE/QUATTRO USER GUIDE 1.
Important To use ‘Caller ID’ (display caller), this service has to be activated on your phone line. Normally you need a separate subscription from your telephone company to activate this function. If you don’t have the Caller ID function on your phone line, the incoming telephone numbers will NOT be shown on the display of your telephone. This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.
Topcom Butler 3300/Twin/Triple/Quattro Buttons Display Installation Base Multi charger Handset Battery low indication Operation Outgoing calls Incoming calls Activate/deactivate hands free function Programming memory numbers Calling a memory number Mute function Setting the volume Paging Flash button (R) Setting the ring volume and melody Key lock Setting the dialling mode Caller-ID function (CLIP) New calls Consulting the Call list Calling a number from the Call list Erasing a number from the Call list St
Topcom Butler 3300/Twin/Triple/Quattro Safety Instructions • • • • • • • • • • Only use the charger plug supplied. Do not use other chargers, as this may damage the battery cells. Only insert rechargeable batteries of the same type. Never use ordinary, non-rechargeable batteries. Insert rechargeable batteries so they connect to the right poles (indicated in the battery compartment of the handset). Do not touch the charger and plug contacts with sharp or metal objects.
Topcom Butler 3300/Twin/Triple/Quattro Buttons ENGLISH 1 Handset 2 10 8 7 4 R 5 14 INT 1 13 11 12 3 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
Topcom Butler 3300/Twin/Triple/Quattro 2 Display ICON: MEANING: You are online New numbers in call list Rechargeable battery level indicator The antenna indicates the quality of reception.
Topcom Butler 3300/Twin/Triple/Quattro 3.2 Connect the AC adaptor to the electric socket ENGLISH • Multi charger 3.3 • Handset Insert 2 rechargeable batteries (AAA) inside the battery compartment of the handset.. + - + Put the handset on the base unit. The red Charge LED will lit as long as the handset is on the base. Charge the handset for a period of 24 hours before using the handset for the first time. To extend the battery life time, discharge the batteries completely from time to time.
Topcom Butler 3300/Twin/Triple/Quattro 4 Battery low indication When the battery is empty, the handset no longer carries out operations. When a battery is completely empty and you have put the handset on the base unit for a short period of time, the Battery symbol will appear to be fully charged but this is actually not the case. The battery capacity will decrease rapidly. We advise you to put the handset on the base unit for 12 hrs so that it can be recharged completely.
Topcom Butler 3300/Twin/Triple/Quattro • • 5.3 Incoming calls When a call comes in, the handset will start to ring. The Press the Line button to answer the incoming call. LED on the base will blink. ENGLISH 5.2 Activate/deactivate hands free function This function allows you to communicate without having to pick up the handset. When you are on the phone, press the Hands free key to activate the hands free function. Press the same button to deactivate the hands free function.
Topcom Butler 3300/Twin/Triple/Quattro The hands free receiver volume is also adjustable as above described! 5.8 Paging When you press the Paging button on the base unit, the handset emits a ringing signal for 20 seconds. This signal helps you find a lost handset. Press any key to stop the ringing on a handset. 5.9 Flash button (R) When you press the R button, also called flash or recall, the unit generates a line interruption (of 100 ms or 250 ms).
Topcom Butler 3300/Twin/Triple/Quattro When the keypad is locked, pressing any key will have no effect during standby (except holding the key). • Press and hold the key • appears on the display and the keypad is locked • Press and hold the key again to un-lock the keypad When there is an incoming call, you can still answer the call by pressing the Line button . During the call, the keypad functions as normal. When the call is ended, the keypad will be locked again 5.
Topcom Butler 3300/Twin/Triple/Quattro • • • After 5 seconds, the telephone number will be shown. You can skip the date/time by pressing the button. Use the left scroll key to scroll to the previous call. Use the button to show the next call. You can leave the Call list by pressing the button. * Only when the network sends the time/date together with the telephone number!!! On some networks with caller ID, time and date will not be displayed 6.3 • • 6.4 • • 6.5 • • • • 7 7.
• • Enter the number of the base unit you would like to subscribe the handset to (1-4) The unit will start searching for the base and when found it will ask to enter the pin code (4 digits): • Enter the base pin code (0000). If the pin is wrong, the handset will restart the searching for the base. When the handset is registered, it will show ‘HS’ followed by the handset number. • 7.
Topcom Butler 3300/Twin/Triple/Quattro You can only remove existing handsets and others then the one you are using. 8 Call transfer and Intercom between two handsets These functions only work when more then one handset (like a Twin/Triple/ Quattro version) is registered to the base! 8.1 • • • 8.2 • • • • 9 Call transfer and conference call during an external call During an external call, press the INT key followed by the number (1-4) of the other handset.
Topcom Butler 3300/Twin/Triple/Quattro 10 Technical Data Dialling options: Batteries: Max. standby time: Max. talk time: Ambient temperature: Permitted relative air humidity: Power supply base adapter: Memories up to 300 m in open space up to 50 m in buildings DTMF (tone) and Pulse 2 x 1.2V, 600 mAh AAA Type NiMH rechargeable approx. 100 hours 11 hours +5 °C to +45 °C 25 to 85 % 220/230V , 50 Hz 10 indirect with max.
visit our website www.topcom.
