Operation Manual

Butler 4056/4056C 11
Butler 4056/4056C
ENGLISH
•‘INT’ and the number of the handset calling, appear on the display. The Call
symbol blinks on the display.
•Press the Line key to accept the internal call.
• During the call, ‘INT’, the handset number of the caller and the symbol appear on the
display. The call timer starts running.
•After finishing your call, press the Line key to hang up.
4.3.3 Receiving an e
xternal call during an internal call
If you receive an external call during an internal call, you will hear a call waiting tone (double
beep) on both handsets being used for an internal call.
•Press the Line key twice to accept the external call.
•After finishing your call, press the Line key to hang up.
4.4 ACTIVATE/DEACTIVATE HANDSFREE FUNCTION
This function allows you to communicate without having to pick up the handset. When you are
talking, press the Up/Handsfree key / to activate the handsfree function.
Press the same button to deactivate the handsfree function.
Note : When you are calling in handsfree mode and you want to change the
volume, press the Volume button .
Attention !! When you use the handsfree function for a long time, the batteries
will be empty quickly !
4.5 TRANSFERRING A CALL TO ANOTHER HANDSET
• You have an external caller on the line.
•Press the INT key twice.
•The external call is now on hold.
•‘INT‘ appears on the display.
•Dial the number of the handset to which you would like to transfer the call.
• If the handset dialled is answered, you can have an internal conversation. Press the Line
key and the external call is transferred.
• If the handset dialled is not answered, press the Down key to speak to the external
caller again.
4.6 OUT OF RANGE WARNING
If the handset is out of range of the base unit, a warning signal will sound.
•‘SEARCHING’ appears on the display and the symbol blinks on the display.
•Move closer to the base unit.
•As soon as you are back within range of the base unit, a signal sounds and the symbol
stops blinking.
4.7 SETTING THE SPEAKER VOLUME
Use the Volume/Ringer key / to set the volume of the speaker (handset). You can
select from 5 levels. The telephone is set to level ‘3’ by default.
During a call, you can change the volume:
HL_B4056_mideur.book Page 11 Thursday, August 5, 2004 9:01 AM