Operation Manual

14 Butler 4056/4056C
Butler 4056/4056C
•Press the Programming key .
• You will hear a long beep. The name and the number are stored in the Phone Book.
4.14.2 Looking up a n
umber in the Phone Book
•Press the Programming key .
•Press the Up or Down key repeatedly until ‘PHONE BOOK’ appears on the display.
•Press the Programming key .
•‘SEARCH‘ appears on the display.
•Press the Programming key .
• Enter the first letters of the desired name.
•Press the Programming key .
•The first name, corresponding with these letters appears on the display.
•Press the Up or Down key to browse for other numbers in the Phone Book.
•Once the desired number appears on the display, the number will be automatically
dialled once the Line key is pressed.
4.14.3 Changing a name or n
umber in the Phone Book
•Press the Programming key .
•Press the Up or Down key repeatedly until ‘PHONE BOOK’ appears on the display.
•Press the Programming key .
•‘SEARCH‘ appears on the display.
•Press the Up or Down key repeatedly until ‘EDIT’ appears on the display.
•Press the Programming key .
•The first number in the Phone Book appears on the display.
•Press the Up or Down key until the desired number appears on the display.
•Press the Programming key to change the selected number programmed into the
memory.
•Press the Delete key to delete each letter of the name and use the alphanumeric
keypad to enter the correct name.
•Press the Programming key .
•Press the Delete key to delete each digit of the number and use the alphanumeric
keypad to enter the correct number.
•Press the Programming key to save the changes made.
4.14.4 Deleting name and n
umber from the Phone Book
•Press the Programming key .
•Press the Up or Down key repeatedly until ‘PHONE BOOK’ appears on the display.
•Press the Programming key .
•‘SEARCH‘ appears on the display.
•Press the Up or Down key repeatedly until ‘DELETE’ appears on the display.
•Press the Programming key .
•The first number in the Phone Book appears on the display.
•Press the Up or Down key until the number you want to delete appears on the
display.
•Press the Delete key .
•‘DELETE ?’ appears on the display.
•Press the Programming key to confirm that you want to delete it.
HL_B4056_mideur.book Page 14 Thursday, August 5, 2004 9:01 AM