Operation Manual

ManualsBrandsTopcom ManualsTelephoneBUTLER 4056

Butler 4056/4056C 17

Butler 4056/4056C

ENGLISH

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘KEY SETUP’ appears on the display.

•Press the Programming key .

• KEY LOCK‘ appears on the display.

•Press the Programming key .

•The current status of the keypad appears on the display:

-‘LOCK’: the keypad is locked

- ‘UNLOCK’: the keypad is not locked

•Press the Up or Down key to make your selection.

•Press the Programming key to confirm your selection.

4.20 TURNING KEY CLICK ON/OFF

You can set the telephone to make a sound whenever you press a key.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘KEY SETUP’ appears on the display.

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘KEY CLICK’ appears on the display.

•Press the Programming key .

•The current status appears on the display:

- ‘CLICK ON’: turn on key click

- ‘CLICK OFF’: turn off key click

•Press the Up or Down key to make your selection.

•Press the Programming key to confirm your selection.

4.21 THE R KEY (FLASH)

Press the Flash key ‘R’ to use certain services such as “call waiting” (if your telephone

company offers this feature); or to transfer calls if you use a telephone exchange (PABX). The

Flash key ‘R’ is a brief interruption of the line. You can set the flash time to 100ms or 300ms.

This is set to 100ms by default! However, if your system requires a longer flash time, do the

following:

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘SETTING’ appears on the display

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘RECALL’ appears on the display.

•Press the Programming key .

•Press the Up or Down key repeatedly to select the flash time:

- SHORT = 100ms

- LONG = 300ms

•Press the Programming key to confirm your selection.

4.22 CHANGING THE PIN CODE

Certain functions are only available if you know the PIN code of the telephone.

The PIN code has 4 digits. The default PIN code setting is ‘0000’. If you would like to change

the default PIN code and set your own secret code, do the following:

•Press the Programming key .

•Press the Up or Down key repeatedly until ‘SETTING’ appears on the display.

•Press the Programming key .

HL_B4056_mideur.book Page 17 Thursday, August 5, 2004 9:01 AM