Telephone User Guide

58
Butler 575 plus
58
4.13.4 Search and automatic dial of a telephone number
• Press the Function button until “PHONE
BOOK” is shown on the display.
• Press the OK button.
• Press the 3or4button until the desired name appears on the display.
• Press the Line button and the number will be dialled automatically.
Note : When the name is shown on the display, you can also display the telephone number by pressing
the OK button.
4.14 Giving a name to a handset
This function allows you to give a name to a handset. Every time the unit is in
standby mode, this name appears on the display.
• Press the Function button until “USER NAME” is
shown on the display.
• Press the OK button.
• “NAME” appears on the display.
• Use the numerical buttons to enter the name.
• Press the OK button to confirm.
For example ‘KIM’
• Press the Function button and select ‘User Name’.
• Press the OK button. ‘Name’ is shown on the display.
• Press ‘5’ twice (‘K’ appears).
• Druk ‘4’ three times (‘I’ appears).
• Druk ‘6’ once (‘M’ appears).
4.15 Telefophone exchange (PABX)
4.15.1 Setting the PABX external line number
• Press the Function button until “PABX SETTING”
is shown on the display.
• Press the OK button. “PABX SET 1” appears on
the display.
• Press the OK button again and enter the external
line number, for ex. 0. Press the OK button to confirm.
Note : When the external line number has not been programmed, ‘EMPTY’ appears on the display.
PHONE BOOK
USER NAME
NAME
PABX SETTING
PABX SET 1