Operation Manual

11 Cocoon 450
ENGLISH
3. USING THE TELEPHONE
3.1. HANDSET ON/OFF
Turn ON handset: Press OK key for 2s. The handset will search the base.
Turn OFF handset: Press OK key for 2s. The display will go OFF.
3.2. RECEIVING A CALL
When receiving an external call, all handsets including the base unit will ring. The EXT icon will
appear on the display and the LED will flash on the base.
When the handset rings, press to answer. You are then connected to your
correspondent. If the handset is lying on the base when the telephone rings, you just need to pick
up the handset to answer the call (if the option autoanswer is set to ON: See 4.9. Automatic
answer).
If you press when the telephone rings, you pick up the line and automatically change to
handsfree mode.
3.3. MAKING AN EXTERNAL CALL
Normal n
umeration:
1. Press .
2. Enter telephone number.
Bloc
k dialling:
1. Dial your correspondent’s number.
2. Press .
To correct a number use the key to delete an entered digit.
3.4. MAKING AN INTERNAL CALL
Only possible when more than one handset is registered to the base!!
Normal n
umeration:
1. Press INT.
2. Enter the number of the internal handset (1 to 5).
Pren
umération:
1. Enter the number of the internal handset (1 to 5).
2. Press INT.
3.5. HANDSFREE MODE
You can converse with your correspondent without picking up the handset.
To activate or deactivate the handsfree mode, press the key during a call.
To adjust the volume, refer to the chapter “ Personalisation “- adjusting speaker volume.