Operation Manual

15 Cocoon 450
ENGLISH
3.15. USING THE MENU
A wide range of telephone functions are accessible through a user-friendly menu.
1. To enter the menu, press MENU.
2. Scroll through the selections using the and keys, the selections scroll in a loop ( you
return to the first after the last). The arrows on the right of the display indicate that there are
other possible selections to scroll through.
3. To validate a selection, press OK.
4. To return to the previous menu, press .
4. PERSONALISATION
4.1. ADJUSTING SPEAKER VOLUME
There are two ways to set the speaker volume:
4.1.1.
Speaker volume during call
During conversation, press the or key to change the volume accordingly
(1-5). Press OK to confirm.
Note: The handsfree volume is also adjusted together with the receiver in the handset
as described above!
4.2. ADJUSTING RING VOLUME
4.2.1.
Handset ring
You can adjust the ring volume during a incoming call by pressing the Up or Down keys.
The default ring volume can be set as follows:
1. Enter the menu by pressing Menu.
2. Select Handset using the and keys.
3. Press OK.
4. Select VOLUME using the and keys.
5. Press OK.
6. Select the desired volume OFF or 1 to 5).
7. Press OK to confirm or to return to the previous menu.
Note: Every setting is confirmed at the end by a double or single long beep. A double
bleep confirms the validation of your choice.
A long bleep signifies that the modification has not been taken into account.
4.2.2.
Base ring
1. Enter the menu by pressing MENU.
2. Select BASE.
3. Press OK.
4. Select UNPROTEC.
5. Press OK.
6. Select VOLUME.
7. Press OK.
8. Select the desired volume (OFF or 1 to 5) by means of the Up and Down keys.
9. Press OK to confirm or to return to the previous menu.
Note: A double bleep confirms the validation of your choice.
A long bleep that the modification has not been taken into account.