Operation Manual

Cocoon 450 24
ENGLISH
6.5. ROOM MONITORING
When more than one handset is registered, one of the handsets can be used as a (baby) monitor
device.
To activate this function:
1. Enter the menu by pressing MENU.
2. Select MONITOR.
3. Press OK.
4. Select ON.
5. Press OK.
The display will show Monitor (blinking) on the handset when room monitoring is activated.
Another handset can call this handset (internally), which will activate the microphone on this
handset. That way, you can monitor every sound in that room.
Note: The handset in monitor mode will not ring when an external call comes in.
To deactivate this function:
1. Enter the menu by pressing MENU.
2. MONITOR is shown.
3. Press OK.
4. Select OFF.
5. Press OK.
7. ANSWERING MACHINE
The Cocoon 450 has a built-in digital answering machine with a recording capacity of 9 minutes
and 20 messages. This answering machine can only be controlled by the supplied handset (not
by other multi handsets). The answering machine can be operated remotely and features the
possibility of recording two outgoing messages (Message 1 and Message 2).
Note: All messages and settings are stored on Flash-Memory and will not be erased
during power failure.
7.1. KEYS HANDSET
7.2. SETTINGS
Two outgoing messages can be recorded (OGM1 and OGM2).
• Outgoing message 1 for the answering function and the possibility for callers to leave a
message. The maximum recording time is 30 seconds
• Outgoing message 2 for the answering function without allowing callers to leave a messages
on the machine (answer only). The maximum recording time is 60 seconds
You can only operate the answering machine by going into the answering machine menu:
• Press to enter the answering menu
• Press ‘C’ to leave the answering menu
Play
Stop
Skip Back
Skip Forward
Answer ON/OFF
Memo
Delete X
Outgoing message
Answering mode key