Operation Manual

Cocoon 755/855 29
Cocoon 755/855
ENGLISH
8.3 BASE KEY FUNCTIONS
Note: - The & keys are at the bottom of the base
8.4 OUTGOING MESSAGES
Two outgoing messages of 2 minutes can be recorded (OGM1 and OGM2).
• Outgoing message 1 for the answering function and possibility for callers to leave a
message.
• Outgoing message 2 for the answering function without allowing callers to leave a
messages on the machine.
8.4.1 Recor
ding outgoing messages (OGM 1 or OGM 2)
• Press the / -key to select the OGM.
•A voice will playback the recorded OGM
• Press the -key for two seconds
• Record the outgoing message after the beep
• Press the Stop -key to stop recording.
Note: The recording cannot exceed 2 minutes. If no outgoing message is
recorded, the prerecorded outgoing message is used.
8.4.2 Pla
yback the Outgoing Message
To check the outgoing message now set:
• Press the -key.
Note: To stop playing the welcome note briefly press the Stop -key .
8.4.3 Select outgoing messa
ge
• Press the / -key to switch between the 2 outgoing messages.
• The internal voice will confirm the set outgoing message.
Key Stand-by mode During message
play-back
Press key briefly press key for 2 seconds
1
Play OGM Record OGM Go to previous message
2
Playback messages None Pause
3
None Record memo Skip message
4
Set volume
speech +ringing
None Set volume
5
/
Select OGM Switch On-Off Stop
6
Play VIP-code Set VIP-code None
7
Current number of
ring tones
Set numbers of
ring tones
None
8
Playback Time Set date/time None
9
None Delete all messages Delete message or
delete OGM
1,2
1,2
1,2
HL_Coc755_mideur.book Page 29 Monday, October 27, 2003 4:33 PM