Mira 100 CORDLESS TELEPHONE OPERATING GUIDE
Mira 100 Dear Customer, Congratulations on having bought the TOPCOM Mira 100 cordless telephone. The Mira 100 is a quality product which offers you a whole range of possibilities and is easy to operate. This operating guide gives you a complete view of all the possible functions. We advise you to first read this operating guide thoroughly before using your Mira 100. Kind regards, TOPCOM COPYRIGHT 1996 TOPCOM® N.V.
Mira 100 TABLE OF CONTENTS Mira 100 1. IMPORT ANT 1. IMPORTANT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2. BASE EQUIPMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Treat the telephone with care. Never place it in a dusty environment and do not expose it to extreme temperatures or direct sunlight. 3. HANDSET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3.1. FRONT VIEW .
Mira 100 Mira 100 3. HANDSET 4. BASE STA TION 3.1. FRONT VIEW 4.1. TOP VIEW 1. 2. 3. 4. 5. 6. 7. Line button Numerical buttons # button Memory button Redial button Transfer button (flash) R Set button 1. 2. 3. 4. 5. 6. 8. 9. 10. 11. 12. 13. Mute button Hang-up button button/ P->T switch Ringer volume switch ON/OFF-switch Battery charger contacts Antenna Power indicator Radio connection indicator Battery indicator Paging button Battery charger contacts 3.2. REAR VIEW 1. 2. 3. 4.
Mira 100 5. GENERAL Mira 100 The battery of the handset has to be charged before telephone calls can be made. The first time the unit is used, it takes at least 10 hours before the battery is fully charged. With cordless telephones, radio connection replaces the cord connecting the handset to the base unit of traditional telephones. This allows you to make and receive calls even when you are away from the base unit. Thanks to this radio connection, your mobility increases.
Mira 100 Mira 100 8. OPERA TION 8.2.2. BACK TO PULSE DIALLING 8.1. OUT OF RANGE W 1. Press the line button 2. Press the set button 3. Press the numbers “28 ” 4. Press the line button ARNING Obstacles between the handset and the base station will influence the operation range. When the handset is too far away from the base station, the quality of the connection will deteriorate and you will hear a warning tone (2 signals).
Mira 100 Mira 100 8.6. HANG-UP BUTTON 8.9. TEMPORARY PULSE -> TONE SWITCH When you have made a mistake while dialling a telephone number, you can press the hang-up button and dial the number again. By pressing the hang-up button it is also possible to make several phone calls after each other without disconnecting the radiolink. After pressing the hang-up button “BREAK” appears on the display. The Mira 100 has been preset to pulse dialling.
Mira 100 Mira 100 8.10.2. DIALLING A MEMORY NUMBER 8.11.1. ACTIVATE CALL BARRING 1. Press the line button and wait for the dial tone. 2. Press the memory button (“SPEED DIAL” appears on the display). 3. Press the number of the memory place, where the telephone number has been stored (0-9). The telephone number is now automatically dialled. 1. Press the line button and wait for the dial tone. 2. Press the set button (“SET” appears on the display). 3.
Mira 100 3. Enter the code number 3719 (“SET BABYCALL” appears on the display). 4. Enter the desired telephone number. 5. Press the set button (“DONE” appears on the display). 6. Press the line button to stop the radio connection. 8.12.2. ACTIVATE BABYCALL 1. Press the line button and wait for the dial tone. 2. Press the set button (“SET” appears on the display). 3. First press the number “1” and then the button (“ “ appears on the display together with the programmed babycall number.
Mira 100 Mira 100 8.15. SETTING RINGER VOLUME 10. TECHNICAL SPECIFICA The ringer volume of the handset and the base station can be set by means of a ringer volume switch. On the backside of the base station you will see a switch with 3 positions. On the handset a switch with 2 positions is present on the right side (front of handset facing you). Frequency Power Transmission range 9.
Mira 100 11. W ARRANTY The Mira 100 has been manufactured and tested to offer you complete satisfaction. TOPCOM secures this device against material and construction defects for a period of 12 months counting from the date the first user purchased it. The warranty card is only valid if the warranty card has been filled in duely, dated and signed. The warranty card has to be sent back within 10 days after the purchase date to TOPCOM.
