User manual

CHAPTER 6
MODEM UNINSTALL
Remove the Topcom Xplorer 850 USB ADSL Modem software drivers by performing the
following steps :
Note: The USB cable should not be unplugged until after the uninstall process has been completed. For
Windows 98 applications, the cable must be unplugged immediately following Step 6 below.
1. Click ‘Start’ – ‘Programs’ – ‘Topcom Xplorer 850 Modem’ – ‘Uninstall’.
A notification message will appear indicating that the setup process has begun.
2. Click ‘Remove’ from the “DSL Modem Installer” window.
3. A message will be displayed asking you to confirm the removal of the USB ADSL modem
software, click ‘Yes’.
4. The “Information” window will be displayed reminding you not to unplug the USB cable
until the uninstall process has been completed. Click ‘OK’.
5. A message will be displayed indicating the software is being removed.
6. The “Setup Complete” window indicates successful completion of the uninstall process.
Click ‘Finish’.
Note : The screen for Windows 2000 applications will not ask the user to reboot the system.
Click ‘Finish’ to complete the Uninstall process.
7. Unplug the USB cable from the PC.
Note : The USB cable must be unplugged before the system is rebooted.
Xplorer 850
131313131313