User manual

APPENDIX C

TCP/IP SETTINGS FOR LAN USB DRIVERS

MICROSOFT® WINDOWS 98, WINDOWS 98 SE AND WINDOWS Me

TCP/IP settings are automatically set up during the software installation process. The following

procedure may be used to change TCP/IP settings, if necessary.

1. From the “Control Panel” window (‘Start’ – ‘Settings’ – ‘Control Panel’) double click on the

‘Network’ icon.

2. Select ‘TCP/IP -> Xplorer 850 USB ADSL LAN Modem’ from the “Conﬁguration” tab of the

“Network” window. Click ‘Properties’.

3. From the “IP Address” tab of the “TCP/IP Properties” window, select either the ”Obtain an

IP address Automatically“ or “Specify an IP Address option”, depending on your network

setup. If you select ‘Specify an IP address’, type the IP Address and Subnet Mask in the

spaces provided. Consult with your network administrator to determine which option best

suits your individual needs.

Xplorer 850

212121212121