User manual

MICROSOFT® WINDOWS 2000
TCP/IP settings are automatically set up during the software installation process. The following
procedure may be used to change TCP/IP settings, if necessary.
1. Right click the ‘My Network Places’ icon and select ‘Properties’.
2. Double click the ”Local Area Connection“ icon from the “Network and Dial-Up
Connections” window.
3. Select ‘Internet Protocol (TCP/IP)’ from the “General” tab of the “Local Area Connection”
window. Click ‘Properties’.
4. The “Internet Protocol (TCP/IP) Properties” window is used to modify the IP addresses and
DNS Server addresses:
• Change the IP address to a user defined address by selecting ‘Use the following IP
address option’ (click inside the circle to the left of it) and typing the addresses in the
spaces provided.
• Change the DNS Server addresses to user defined addresses by selecting ‘Use the
following DNS server addresses’ (click inside the circle to the left of it) and typing the
addresses in the spaces provided.
Note: The Advanced button of the “Internet Protocol (TCP/IP) Properties” window may be used to
Xplorer 850
2323232323