User manual

6. The “Setup Complete” window indicates successful completion of the installation process.

Select the ‘Yes, I want to restart my computer ‘now’ option, remove any disks from their

drives, and click ‘Finish’. Your PC will reboot. Continue with the Hardware Installation section.

HARDWARE INSTALLATION

Note: For Windows 98 SE applications, you may need the Windows 98 SE CD ROM to complete the installation.

Once the PC has rebooted, install the Topcom Xplorer 850 USB ADSL Modem.

1. Insert the rectangular end of a USB cable into the USB port of your PC.

2. Insert the square end of the USB cable into the USB port of the Xplorer 850 USB Modem.

Note: The USB Modem will be detected and messages will be displayed as the modem software is

installed.

3. For Windows 2000 applications, the “Digital Signature Not Found” window may appear

warning that the installation software is not a digitally signed version. A digital signature is

not necessary. Click ‘Yes’ to allow the installation to continue. For Windows 2000 applications,

the “Found New Hardware Wizard” window indicates the modem has been installed and

suggests you reboot the system to have new settings take effect. Click ‘Finish’.

4. A message will be displayed conﬁrming reboot of the system, click ‘Yes’.

Once the PC has rebooted, installation of the Topcom Xplorer 850 USB Modem is complete.

Xplorer 850

888888