Operation Manual

26 UCOM TWINTALKER 3600

UCOM TWINTALKER 3600

12.10 CHANNEL MONITOR

This functions allows you to monitor a set channel and CTCSS code for 15

seconds for any activity.

12.10.1 Activ

ate monitor mode

• Press the - button six times to start monitoring the channel acti-

vity, The set channel and CTCSS code is displayed.

• Press the - button to increase or the - button to decrease the

speaker volume level.

• Channel monitor automatically stops after 15 seconds

12.10.2 De-activ

ate monitor mode

• In monitor mode, press the - button or the - button to de-

activate the monitor mode or wait 15 seconds for monitoring to stop

automatically.

12.11 ROGER BEEP ON/OFF

After the - button is released, the unit will send out a roger beep to

conﬁrm that you have stopped talking.

To disable the roger beep.

•Turn the units off (§12.1)

• Press and hold the - button while turning the unit on. (§12.1)

To enable the roger beep, follow the same instructions.

PTT