Twintalker User Guide

Topcom Twintalker 7000 7

Topcom Twintalker 7000

ENGLISH

12 Using the Twintalker 7000

12.1 Turning the Unit ON/OFF

The main switch is located on the bottom of each unit (6). Set the switch to ‘ON’ before

switching the unit on.

• To activate; press and hold . The unit will “beep” and the LCD Screen will display the

current channel, CTCSS/CDCSS code.

• To switch off; press and hold again. The unit will “beep”.

If the unit is not going to be used for a longer period, set the main switch (6) on the bottom of

the unit to ‘OFF’.

12.2 Adjusting Speaker Volume

The Speaker Volume can be adjusted using and . The Speaker Volume level is

displayed.

12.3 Receiving a Signal

The unit is continuously in the receive mode when the unit is on and not transmitting.

12.4 Transmitting a Signal

• Press and hold to transmit.

• Hold the unit in a vertical position with the microphone 10 cm from the mouth and speak

into the microphone.

• Release when you have finished transmitting.

12.5 Changing Channels

The PMR has 8 available channels.

To change channels:

• Press once, the current channel number flashes on the LCD Screen.

• Press or to change the channel.

• Press to confirm your selection and return to the NORMAL mode.

• To confirm and shift to the next option, press .

NOTE: Any PMR set on the same channel can receive and listen to the conversation.

In order for other people to receive your transmission, they

must be set on the same channel and CTCSS/CDCSS code