WEBR@CER 852 PSTN INSTALLATION GUIDE INSTALLATIEHANDLEIDING GUIDE D’INSTALLATION
Topcom Webr@cer 852 1 SAFETY INSTRUCTIONS • • • Keep the modem away from fluid, direct sunlight and excessive heat. During times of lightning strike/thunderstorm, do not use the modem. Clean this modem with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. The CE symbol indicates that the unit complies with the essential requirements of the R&TTE directive.
Topcom Webr@cer 852 Power : Lights up when power is supplied via the USB port from the PC. ADSL : Lights up when the ADSL link is established. Data : Blinks when the modem is transmitting/receiving data. ENGLISH • • • 5 WIRING CONNECTIONS PHONE PHONE WEBR@CER 852 pstn PC 6 WEBR@CER 852 DRIVER INSTALLATION FOR PC The Webr@cer 852 PSTN can be installed on computers running on: Windows 98 SE, Windows ME, Windows 2000 and Windows XP.
Topcom Webr@cer 852 - The setup screen for the Webr@cer 852 PSTN will appear. • Please click “Install Driver” - The installation of the driver will start. • Please plug in the USB cable of the modem - The driver installation will continue automatically. ! Windows 98 SE Please keep your Windows 98 SE CD at hand. You will be asked for it during the installation.
Topcom Webr@cer 852 - ENGLISH During installation the following screens will appear : Please select “Continue Anyway” to proceed the installation - please make sure that “Install the software automatically (Recommended)” is selected and click “Next” - please click “Finish” to complete the installation.
Topcom Webr@cer 852 • When the installation is complete next screen will appear : • Click “OK” to finish. If necessary the computer will restart automatically. On the desktop a new icon will appear : 7 WEBR@CER 852 DRIVER INSTALLATION FOR MAC. The Webr@cer 852 PSTN can be installed on computers running on MAC OS 9.X and MAC OSX 10.X. 7.1 MAC OS 9.X On the CD you will find a map MAC • Open “MAC” - now open “MAC_OS9” - open the compressed file “OS9_PACK.
Topcom Webr@cer 852 • ENGLISH 7.2 MAC OSX 10.X On the CD you will find a map MAC Open “MAC” - now open “MAC_OSX” - open the compressed file “Release.sit” A new map will be created: “Release” • Open “Release” - now open the file “Install_USB_ADSL.pkg” • • • The driver will be installed. Now reboot the computer. Plug in the modem. 8 INTERNET CONNECTION To get connected to the Internet you have to enter the username and password into the modem.
Topcom Webr@cer 852 • Now the login screen will appear: username = admin / no password is required - click “OK” to proceed. • Now you enter the Internet connection settings • - Enter your Username and Password from your ISP. - please make sure that the connection protocol and VPI/VCI settings are correct.
Topcom Webr@cer 852 The modem will reboot now: ENGLISH • - please wait for at least 40 seconds until the modem has rebooted. The ADSL LED should be on before clicking “here” to proceed. • If the Connection settings are correct, the modem will show the connection status as below: - the WAN IP address provided by the ISP will be shown. (example: 212.239.205.47) Next time you start up your computer, the modem will automatically connect to the Internet.
Topcom Webr@cer 852 8.1 MODEM MENU 8.1.1 • Quick start Login Status - This screen shows the connection status. You can disconnect the connection at any time by clicking the “Disconnect” button. • Login Settings - You can change the connection settings. Please first click the “clear” key to delete current settings. Then click “Connect” to connect.
Topcom Webr@cer 852 Diagnostic Test 8.1.2 • ENGLISH • this feature will test your connection Status Overal Status - this screen informs you about the connection status and the WAN-IP address.
Topcom Webr@cer 852 8.1.3 Configurations The Configurations menu should only be used by advanced users. It is not recommended to change values in these screens ! • WAN • • PVC Profile: here you can change the connection protocol, VPI and VCI settings. PPP configuration: username / password, authentication (PAP, CHAP, AUTO), MTU value and Auto reconnection. Static WAN: for static IP configuration DHCP: enable DHCP-client and enter Host Name.
• DNS • You can manually enter the DNS setting. ENGLISH Topcom Webr@cer 852 First click “Apply”, then “Save Settings” to save the entry. Click “Reset” to go back to default setting. 9 WARRANTY • • • • • This equipment comes with a 24-month warranty. The warranty will be honoured on presentation of the original bill or receipt, provided the date of purchase and the unit type are indicated.
Topcom Webr@cer 852 1 VEILIGHEIDSINSTRUCTIES • • • Houd de modem uit de buurt van vloeistof, rechtstreeks zonlicht en overdreven hitte. Gebruik de modem niet bij donder of blikseminslag. Reinig deze modem met een niet te vochtig of een antistatisch doekje. Gebruik nooit schoonmaakmiddelen of schuurproducten. Het CE-symbool geeft aan dat de modem overeenstemt met de essentiële vereisten van de R&TTE-richtlijn.
Topcom Webr@cer 852 • • • Power: Licht op wanneer er stroom wordt geleverd via de USB-poort van de pc. ADSL: Licht op wanneer de ADSL-verbinding gelegd is. Data: Flikkert wanneer de modem gegevens doorstuurt/ontvangt. NEDERLANDS 5 AANSLUITINGEN PHONE PHONE WEBR@CER 852 pstn PC 6 INSTALLATIE VAN HET WEBR@CER 852-STUURPROGRAMMA VOOR PC De Webr@cer 852 PSTN kan geïnstalleerd worden op computers met: Windows 98 SE, Windows ME, Windows 2000 en Windows XP.
Topcom Webr@cer 852 - Het installatiescherm voor de Webr@cer 852 PSTN wordt weergegeven. • Klik op “Installatie Drivers” - De installatie van het stuurprogramma wordt opgestart. • Sluit dan de USB-kabel aan op de modem - De installatie van het stuurprogramma zal automatisch opstarten. ! Windows 98 SE Houd uw Windows 98 SE cd bij de hand. Er zal om gevraagd worden tijdens de installatie.
Topcom Webr@cer 852 - NEDERLANDS Tijdens de installatie zullen volgende schermen afgebeeld worden: Kies "Continue Anyway" (“Toch doorgaan”) om de installatie verder te zetten - Zorg ervoor dat "Install the software automatically (Recommended)" is aangevinkt en klik op "Next" - Klik daarna op "Finish" om de installatie te voltooien.
Topcom Webr@cer 852 • Als de installatie afgewerkt is, ziet u het volgende scherm: • Klik op "OK" om te beëindigen. Indien nodig, zal de computer automatisch opnieuw opstarten. Op het bureaublad zal een nieuwe pictogram verschijnen: 7 INSTALLATIE VAN HET WEBR@CER 852 STUURPROGRAMMA VOOR MAC. De Webr@cer 852 PSTN kan geïnstalleerd worden op computers met MAC OS 9.X en MAC OSX 10.X. 7.1 MAC OS 9.
Topcom Webr@cer 852 • • • Het installatieprogramma wordt dan geïnstalleerd. Start de computer opnieuw op. Plug de modem in. 7.2 MAC OSX 10.X Op de cd vindt u een map met de naam MAC Open "MAC" - Open nu "MAC_OSX" - Open het gecomprimeerde bestand "Release.sit" NEDERLANDS • Er wordt een nieuwe map aangemaakt: "Release" • Open "Release" - Open nu het bestand "Install_USB_ADSL.pkg" • • • Het installatieprogramma wordt dan geïnstalleerd. Start nu de computer opnieuw op. Plug de modem in.
Topcom Webr@cer 852 • Nu verschijnt het aanmeldscherm: Gebruikersnaam = admin / er is geen wachtwoord vereist - Klik op "OK" om verder te gaan. • Nu bent u bij de instellingen voor Internetverbinding • - Voer de gebruikersnaam en het wachtwoord van uw ISP in. - Zorg ervoor dat het verbindingsprotocol en de VPI/VCI-instellingen correct zijn.
Topcom Webr@cer 852 De modem zal nu opnieuw opgestart worden: - Wacht minstens 40 seconden tot de modem opnieuw is opgestart. Het ADSL LED moet branden vooraleer u op "here" kunt klikken om verder te gaan. • Als de verbindingsinstellingen correct zijn, vertoont de modem de volgende verbindingstoestand: - het door de ISP geleverde WAN IP-adres wordt afgebeeld. (voorbeeld: 212.239.205.
Topcom Webr@cer 852 8.1 MENU MODEM 8.1.1 • Quick start Login Status - Dit scherm toont de toestand van de verbinding. U kunt de verbinding op elk moment verbreken door op de knop "Disconnect" te drukken. • Login Settings - Hier kunt u de verbindingsinstellingen wijzigen. Klik eerst op de knop "clear" om de huidige instellingen te wissen. Klik dan op "Connect" om een verbinding op te starten.
Topcom Webr@cer 852 Diagnostic Test NEDERLANDS • 8.1.2 • Deze functie zal uw verbinding testen Status Overal Status - Dit scherm biedt u informatie over de toestand van de verbinding en het WAN-IP-adres.
Topcom Webr@cer 852 8.1.3 Configurations Het menu Configurations mag enkel gebruikt worden door ervaren gebruikers. Het geniet de voorkeur de waarden op deze schermen niet te wijzigen! • WAN • • PVC Profile: Hier kunt u het verbindingsprotocol en de VPI- en VCI-instellingen wijzigen. PPP configuration: Gebruikersnaam / wachtwoord, verificatie (PAP, CHAP, AUTO), MTU-waarde en automatisch nieuwe verbinding. Static WAN: Voor statische IP-configuratie DHCP: Activeren DHCP-client en invoeren Host Name.
• DNS • U kunt de DNS-instelling manueel invoeren. NEDERLANDS Topcom Webr@cer 852 Klik eerst op "Apply", daarna op "Save Settings" om de ingevoerde gegevens op te slaan. Klik op "Reset" om terug te gaan naar de standaard instelling. 9. DE GARANTIE VAN TOPCOM • • • • • De garantieperiode bedraagt 24 maanden. De garantie wordt verleend na voorlegging van de originele factuur of betalingsbevestiging waarop de datum van aankoop en het toesteltype staan vermeld.
Topcom Webr@cer 852 1 INSTRUCTIONS DE SÉCURITÉ • • • Conservez le modem loin de tout liquide, de la lumière directe du soleil et de la chaleur excessive. En cas d’éclair / orage, n’utilisez pas le modem. Nettoyez le modem avec un chiffon légèrement humide ou avec un tissu anti-statique. N’utilisez jamais d’agents de nettoyage ou de solvants abrasifs. Le symbole CE indique que l’unité est conforme aux exigences essentielles de la directive R&TTE.
Topcom Webr@cer 852 • • • Power : S’allume lorsque l’alimentation est assurée par le biais du port USB du PC. ADSL : S’allume lorsque la liaison ADSL est établie. Data : Clignote lorsque le modem transmet / reçoit des données. FRANÇAIS 5 CONNEXIONS CÂBLÉES PHONE PHONE WEBR@CER 852 pstn PC 6 INSTALLATION DU PILOTE WEBR@CER 852 POUR PC Le Webr@cer 852 PSTN peut être installé sur des ordinateurs tournant sous : Windows 98 SE, Windows ME, Windows 2000 et Windows XP.
Topcom Webr@cer 852 - L’écran d’installation du Webr@cer 852 PSTN apparaît. • Veuillez cliquer sur "Installer" - L’installation du pilote démarre. • Veuillez brancher le câble USB du modem - L’installation du pilote se poursuit automatiquement. ! Windows 98 SE Veuillez garder votre CD Windows 98 SE à portée de main. Le système vous le demandera pendant l’installation.
Topcom Webr@cer 852 Durant l’installation, les écrans suivants apparaissent : Veuillez sélectionner "Continue Anyway" pour poursuivre l’installation FRANÇAIS - - Veuillez vous assurer que "Install the software automatically (Recommended)" est sélectionné et cliquez sur "Next". - Veuillez cliquer sur "Finish" pour achever l’installation.
Topcom Webr@cer 852 • Lorsque l’installation est achevée, l’écran suivant apparaît : • Cliquez sur "OK" pour terminer. Si nécessaire, l’ordinateur redémarre automatiquement. Une nouvelle icône apparaît sur le bureau : 7 INSTALLATION DU PILOTE DU WEBR@CER 852 POUR MAC. Le Webr@cer 852 PSTN peut être installé sur des ordinateurs tournant sous MAC OS 9.X et MAC OSX 10.X. 7.1 MAC OS 9.
Topcom Webr@cer 852 7.2 MAC OSX 10.X Sur le CD, vous trouverez un dossier MAC • Ouvrez "MAC" Ouvrez maintenant "MAC_OSX" Ouvrez le fichier compressé "Release.sit" • Ouvrez "Release" - Ouvrez maintenant le fichier "Install_USB_ADSL.pkg" • • • Le pilote sera installé. Redémarrez votre ordinateur. Branchez le modem. 8 CONNEXION INTERNET Pour vous connecter à internet, vous devez entrer vos nom d’utilisateur et mot de passer dans le modem.
Topcom Webr@cer 852 • L’écran de login apparaît : Nom d’utilisateur = admin / aucun mot de passe n’est requis - cliquez sur "OK" pour poursuivre. • Entrez maintenant les paramètres de la connexion Internet • - Entrez vos nom d’utilisateur et mot de passe fournis par votre FAI. - Veuillez vous assurer que le protocole de connexion et les paramètres VPI/VCI sont corrects.
Topcom Webr@cer 852 • Le modem va maintenant redémarrer : - Veuillez attendre au moins 40 secondes jusqu’à ce que le modem ait redémarré. La DEL ADSL doit être allumée avant de cliquer sur "here" pour poursuivre. Si les paramètres de connexion sont corrects, le modem indique le statut de connexion suivant : FRANÇAIS • - l’adresse IP WAN fournie par votre FAI sera affichée. (exemple : 212.239.205.
Topcom Webr@cer 852 8.1 MENU DU MODEM 8.1.1 Démarrage rapide • Statut du Login - Cet écran vous montre le statut de la connexion. Vous pouvez cesser la connexion à tout moment en cliquant sur le bouton "Disconnect". • Paramètres de Login - Vous pouvez modifier vos paramètres de connexion. Veuillez d’abord cliquer sur le bouton "clear" pour effacer les paramètres actuels. Cliquez ensuite sur "Connect" pour vous connecter.
Topcom Webr@cer 852 Test de Diagnostic 8.1.2 • FRANÇAIS • Cette option teste votre connexion Statut Statut général - Cet écran vous informe du statut de la connexion et de l’adresse IP du WAN.
Topcom Webr@cer 852 8.1.3 Configurations Le menu Configurations ne doit être utilisé que par des utilisés expérimentés. Il n’est pas recommandé de modifier les valeurs dans ces écrans ! • WAN • • Profil PVC : Ici, vous pouvez changer le protocole de connexion, les paramètres VPI et VCI. Configuration PPP : Nom d’utilisateur / mot de passe, authentification (PAP, CHAP, AUTO), valeur MTU et Auto reconnexion.
Topcom Webr@cer 852 • DNS • Vous pouvez entrer manuellement le paramètre DNS. 9. GARANTIE DE TOPCOM • • • • • La durée de la garantie est de 24 mois. La garantie est assurée sous présentation de la facture originale ou d'une preuve de paiement mentionnant la date d'achat ainsi que le type d'appareil. Topcom prend en charge pendant la durée de la garantie toutes les défaillances issues de défauts des matériaux ou de défauts de fabrication.
www.topcom.net This product is in compliance with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC. The Declaration of conformity can be found on : http://www.topcom.