User Manual

HiPerII Chapter 1
SD/MMC and SIM Card Slots
The SD and SIM card slots reside under the batteries near the base of the dome.
The SD card slot is located to the left of the MINTER inside the battery pocket ( Figure 1-9 )
and connects an optional SD card to the receiver board to provide memory. Once installed, the
SD card usually remains inside the receiver. The data that resides on the SD card can be
accessed via the serial port, or Bluetooth wireless technology. A secure digital card can be
purchased at a local computer supply store.
The SIM card slot is located to the inside the battery pocket and allows a standard SIM card
to be installed in the receiver. Once installed, the SIM card provides a unique identification for
the receiver's GSM module and enables the receiver's GSM functionality based on the
subscribed ser-vices ( the receiver board accesses the GSM module which accesses the SIM
card ). The SIM card usually remains inside the receiver. The GSM module with the SIM card
installed can be accessed via Modem-TPS for configuration purposes. A SIM card can be
purchased from a local cellular provider.
Card Slot
SD and SIM
Figure 1-9. HiPerII Card Slot Example
Cables
The HiPerII package includes standard communication cables for configuring the receiver.
Table 1-3 lists the cables included in the HiPerII package.
Table 1 -3. HiPerII Package Cables
HiPerII Chapter 1