User Manual

HiPerII Chapter 1
IC Additional statement with Detachable Antennas
This device has been designed to operate with the antennas listed below, and having a
maximum gain of 2.4 dB. Antennas not included in this or having a gain greater than 2.4 dB are
strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
• HiPerII/U 2.4dBi whip antenna Manufacture/Type
410-440MHz ANTENEX/G420BN
440-470MHz CENTURION/EVR450
• HiPerII/FH 2.4dBi whip antenna Manufacture/Type
CENTURION/EVR450
Community of Europe Compliance
The product described in this manual is in compliance with the R&TTE and EMC directives
from the European Community.
European Community Declaration of Conformity with R&TTE Directive
1999/5/EC
The following standards were applied: (R&TTE Directive 1999/5/EEC)
• EN 301 489-1 V1.8.1 (2008-04)
• EN 301 489-5 V1.3.1 (2002-08)
• EN 301 489-17 V1.3.2 (2008-04)
• EN 300 328 V1.7.1 (2006-10)
• EN 300 113-2 v1.4.1 (2007-07)
• EN 62311:2008
• EN 60950-1:2001 + A11:2004
The following CE mark is affixed to the device:
HiPerII Chapter 1