User's Manual
Table Of Contents
- GMS-2 Operator’s Manual
- Table of Contents
- Preface
- Ch1: Introduction
- Ch2: Preparing the GMS-2 for Use
- Ch3: Using the GMS-2
- Ch4: Troubleshooting
- ApA: GMS-2 Software Reference
- ApB: Specifications
- ApC: Safety Warnings
- ApD: Regulatory Information
- APE: Warranty Terms
- Index
Using the GMS-2
GMS-2 Operator’s Manual
3-2
Connecting the GMS-2 and a
Computer
Connecting the GMS-2 and a computer allows software to be
installed onto the controller and data to be uploaded from the
controller to a computer.
When connecting the GMS-2 and a computer, Microsoft ActiveSync
must be installed on the computer. See “Installing Microsoft
ActiveSync” on page 2-7 for details.
1. Connect the GMS-2 and the computer using the USB or serial
cable, or Bluetooth wireless technology.
Figure 3-2. Connect GMS-2 and Computer (USB) Using Cable
2. When ActiveSync on the computer prompts to set up a
partnership, select “No” and click Next.
3. Once the connection has been established, click the “Explorer”
icon on the ActiveSync screen to view data on the GMS-2
compact flash card.
NOTE
For a Bluetooth connection, see “Connecting the
GMS-2 and a Bluetooth Device” on page 3-3 for
details.
Using a cable to
connect the GMS-2
and a computer.