User's Manual

GMS-2 Software Reference
GMS-2 Operator’s Manual
A-4
Working with BTManager
When first opening BTManager or after a reset, accessibility options
will need to be entered. If connecting to a computer or phone device,
service information will need to be selected. Once parameters have
been entered, you can view and connect detected Bluetooth devices.
Select Accessibility Options
The Accessibility tab defines device information (the internal GMS-2
Bluetooth module) and if external devices can see/connect to the
GMS-2. The address of the GMS-2 Bluetooth module also displays
on this tab.
1. Open BTManager and tap the Accessibility tab.
2. Enter a name for the internal GMS-2 Bluetooth module.
This name will be used to identify the GMS-2 to other Bluetooth-
enabled devices.
3. If pairing the GMS-2 with other devices, enter a PIN code.
4. Select the following selections:
• Allow other device to connect
• All devices (or Paired Devices if a PIN is being used)
• Other devices can discover me
Note that at first-time use and after a reset, these parameters will
be de-selected.
Figure A-2. Check Bluetooth Module Accessibility Settings