User's Manual

BTManager
P/N 7010-0752
A-5
Enable Serial Port/Dial-up Services
The Serial Port and Dial-up tabs enable parameters for connecting to
computer/network systems.
• Serial port service is required to connect to a computer.
• Dial-up service is required to connect to a phone.
Settings for Serial Port service are only available if Dial-Up service is
disabled, and vice versa. An error message will display if trying to
connect to a computer/phone device without first setting up the
service parameters.
1. Open BTManager and tap the Serial Port or Dial-Up tab.
2. If using a Phone device (Serial Port tab) or Dial-up network
service (Dial-Up tab), select “Enable Service” and the port to use
for communication (typically COM1).
3. If the service requires authentication, select “Authentication
(Passkey) required”. If needed, also select the authorization and
encryption options.
Figure A-3. Enable Serial Port or Dial-Up Parameters
Serial Port
Service (Enabled)
Dial-Up
Service (Disabled)