User's Manual

Introduction

GMS-2 Operator’s Manual

For example, if using TopSURV as the data collection software,

refer to the TopSURV Reference Manual.

5. Via the data collection software, begin logging data.

6. When you reach a location to record a point, pause and press the

Enter button on the GMS-2. Wait until the point is recorded

before moving to the next location.

Backing up Windows CE RAM Data

The Windows CE RAM data stores such items as collected/saved data,

registry information, and installed programs. Performing a regular

backup of this data will ensure efficient and continued use of the

GMS-2. RAM data will be lost in the following situations:

• Losing battery power through draining the battery or removing

the battery.

The Windows CE RAM has a separate backup,

rechargeable battery. This battery will power the

RAM for five minutes after removing the primary

battery.

•

• Performing a hardware reset.

• Upgrading the operating system.

When backing up RAM data, data is stored on the internal flash

memory in a “Backup” directory.

1. On the main screen of the GMS-2, tap StartControl

PanelSystemBackup.