User's Manual Part 1

Getting Acquainted
P/N 7010-0713
1-11
With Bluetooth wireless technology, the receiver’s reception and
transmission distance is 10 meters (32 feet) for interior projects and
30–50 meters (98–164 feet) for exterior projects.
The Bluetooth module’s processor and firmware are independent of
the receiver card and power board.
Radio Modem
The receiver incorporates an internal, TPS UHF transmitter/receiver
at 20MHz bandwidth, with a 12.5/25kHz channel spacing, and a
maximum 2W power output for data transmission. The Base station’s
modem transmits the carrier phase and code measurements along
with the reference station information (that is, location) to the Rover
station modem.
The frequency range of the modem depends on the country in which
the receiver is used: for North America, the frequency range is 410–
470; for all other countries, contact your local distributor.
TIP
TIP
The HiPer XT is compatible with Pacific Crest radio
modems.
GSM Module
GSM modems function similarly to a standard cell phone, where one
modem (at the Rover) calls another (at the Base). If your receivers are
configured with GSM capabilities, a phone number and service plan
are required. Contact your Topcon dealer for details.
ANYTHING ELSE??
The GSM module internally connects to and controls through the
UHF modem board.
Power Board
The internal power board manages receiver power and battery
charging, and is connected to the receiver board and the batteries. The
power board receives power from the internal batteries, even when the