User's Manual Part 1

Connecting the Receiver and a Computer

P/N 7010-0713

2-11

Establishing a Wireless Connection

The HiPer XT receiver contains Bluetooth wireless technology that

allows file transfer and synchronization between the receiver and any

other external device that supports Bluetooth wireless technology; for

example, an iPAQ, or a computer with USB-to-Bluetooth adapter or

PCMCA-to-Bluetooth adapter installed.

NOTICE

Changing the receiver’s Port B default settings will affect

the Bluetooth link. The default settings for Port B are:

115200 bps, 8 data bits, 1 stop bit, no parity, and no

handshaking.

The receiver and external device connection procedure varies slightly

depending on the type of external device used. In general, the

connection procedure is as follows:

NOTICE

Refer to your Bluetooth-enabled external device

documentation for detailed connection information.

1. Turn on a Bluetooth-enabled external device and the receiver. The

default external device mode is Master; the receiver’s Bluetooth

module mode is Slave.

2. Instruct the external device (Master) to search for the receiver

(Slave).

3. Once the Master device detects the receiver, use the procedure

described in the external device’s documentation to connect it

with the receiver.

4. Once connected, continue with Step 1 in “Establishing a PC-

CDU Connection” on page 2-13.