User's Manual Part 1

Receiver Configuration
P/N 7010-0713
2-15
Once a PC-CDU connection with the receiver has been established,
the current communications settings—such as, port name, baud rate
(if applicable), and flow control (if applicable)—display in the lower-
left corner of the main window of PC-CDU. A timer begins to count
up in the lower-right corner as well (Figure 2-10).
Figure 2-10. PC-CDU Connection Established
Receiver Configuration
PC-CDU configures the various parts of the receiver, saving the
settings in the receiver’s memory, and will be reflected when you use
the MINTER. The full range of PC-CDU configuration and function
is outside the scope of this manual.
TIP
TIP
Refer to the PC-CDU User’s Manual to manage all possible
receiver configurations.
The following configuration is recommended for the most common
applications. However, you can select configuration parameters as
needed for your particular jobsite.
NOTICE
NOTICE
Click Apply after making any configuration change,
otherwise your receiver will not accept the change.