User's Manual Part 1

Receiver Configuration
P/N 7010-0713
2-17
4. Click the Advanced tab then the Multipath Reduction tab,
enable the following boxes, and click Apply (Figure 2-12).
• Code multipath reduction
• Carrier multipath reduction
Figure 2-12. Receiver Configuration – Advanced Tab
5. Click the Loop Management tab, enable the following boxes,
and click Apply (Figure 2-13).
• Enable Co-Op tracking
• Static Mode
Figure 2-13. Advanced Configuration – Loop Management
6. Click OK to close the Receiver Configuration dialog box.
7. Click FileDisconnect, then FileExit to quit PC-CDU.
Disconnecting before exiting ensures proper port management.