User's Manual Part 1

Radio Configuration

P/N 7010-0713

2-27

Configuring a Base Station’s UHF

Radio Modem

NOTICE

To comply with RF exposure requirements, maintain at

least 25cm between the user and the radio modem.

For HiPer XT receivers, the integrated TPS UHF radio modem

provides TX/RX UHF communications between a Base Station and

Rover. To configure the UHF radio modems, have the following

ready:

• Computer running Windows® 98 or newer

• Modem-TPS ver 1.7 or newer

• Serial cable (or Bluetooth wireless technology capabilities)

1. Connect the computer and receiver using an RS232 cable or

Bluetooth wireless technology.

2. Turn on the receiver.

3. Open Modem-TPS and select the COM port the receiver is

connected to (Figure 2-19).

4. Click Connect.

Figure 2-19. Connect to Modem-TPS