User's Manual Part 1

Bluetooth Module Configuration
P/N 7010-0713
2-43
Bluetooth Module
Configuration
Use BTCONF, Topcon’s Bluetooth module’s configuration program,
and your computer to:
• access the Bluetooth wireless technology module
• configure the Bluetooth module
• check or change the module’s configuration
To access the Bluetooth wireless technology module, first download
and install BTCONF, then connect your computer and the receiver
and run the configuration program.
1. Create or locate the following folder:
C:\Program Files\TPS\BTCONF
2. Download btconf.zip from the TPS website and unzip it into the
BTCONF folder. This file contains Btconf.exe, the executable file
for the Bluetooth module configuration program.
Each time you run BTCONF and configure the Bluetooth module,
BTCONF saves your settings in a file (btconf.ini). BTCONF
automatically updates the file each time you make changes to the
Bluetooth module’s settings.
TIP
TIP
To maintain unique Bluetooth module settings for different
purposes, keep copies of BTCONF in separate folders.
To uninstall BTCONF, delete any applicable BTCONF directories or
folders, and any BTCONF shortcuts.
Once you have BTCONF available, follow these steps to configure
the Bluetooth module.
1. Using the RS232 cable, connect the serial port of your computer
(usually COM1) to the receiver’s serial port A. If needed, turn on
the receiver and computer.