User's Manual Part 1

Configuration
HiPer XT Operator’s Manual
2-44
2. Run the Bluetooth module configuration program (Btconf.exe)
(Figure 2-27).
Figure 2-27. Bluetooth Module Configuration Main Screen
Notice that the lower left corner shows a “Disconnected” status
for the computer and Bluetooth module.
For BTCONF version and copyright information, click the About
button.
3. From the drop-down list in the upper left corner, select the
computer serial port (usually COM1) used for communication
(Figure 2-28 on page 2-44).
4. Click Connect to connect the computer and Bluetooth module
(Figure 2-28).
Figure 2-28. Select Communication Port and Click Connect