User's Manual Part 1

Bluetooth Module Configuration
P/N 7010-0713
2-45
Once the receiver and computer connect through BTCONF, the
Identification tab (Figure 2-29) displays the following
information:
• Bluetooth name – the name of the Bluetooth module, set in
the Parameters tab.
• Bluetooth address – the unique electronic address for your
Bluetooth module.
• Firmware version – the current firmware version of the
Bluetooth module.
Figure 2-29. BTCONF Identification Tab
The COM port and baud rate display in the lower left corner.
5. Click the Parameters tab (Figure 2-30). The Parameters tab sets
identifying and security information for your Bluetooth module.
The security section allows you to set data security and
unauthorized access parameters for the Bluetooth module.